update v1.5.0

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELBloodBleDataModel.h

 @property (nonatomic, assign) int heartRate; //Heart rate(心率)
 @property (nonatomic, assign) ELDeviceBloodPressureUnit unit;//单位
 @property (nonatomic, assign) int point; //小数点
-@property (nonatomic, assign) NSInteger createTime;//时间
+@property (nonatomic, assign) long long createTime;//时间
 
 @end
 

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELBloodSugarBleHeader.h

+//
+//  ELBloodSugarBleHeader.h
+//  Elink
+//
+//  Created by iot_user on 2020/7/7.
+//  Copyright © 2020 iot_iMac. All rights reserved.
+//
+
+#ifndef ELBloodSugarBleHeader_h
+#define ELBloodSugarBleHeader_h
+#import <AILinkBleSDK/ELSDKHeader.h>
+
+//设备状态
+typedef NS_ENUM(NSUInteger, BloodSugarDeviceStatus) {
+    BloodSugarDeviceStatusNoStatus        = 0x00, //无状态
+    BloodSugarDeviceStatusTestWaiting     = 0x01, //设备等待插入试纸
+    BloodSugarDeviceStatusSamplingWaiting = 0x02, //设备已插入试纸，等待获取血样
+    BloodSugarDeviceStatusAnalysising     = 0x03, //血样已获取，分析血样中...
+    BloodSugarDeviceStatusTestComplete    = 0x04, //上发数据完成，测量完成
+};
+
+
+typedef struct BloodSugarDataStruct{
+    int value;  //数值
+    ELDeviceBloodSugarUnit unit; //单位
+    int point;
+}BloodSugarDataStruct; //小数点
+
+typedef NS_ENUM(NSUInteger, BloodSugarErrorCode) {
+    BloodSugarErrorCodeLowBattery    = 0x01 ,//电池没电
+    BloodSugarErrorCodeUsedTestPaper = 0x02 ,//已使用过的试纸
+    BloodSugarErrorCodeTempHigh      = 0x03 ,//环境温度超出使用范围
+    BloodSugarErrorCodeCancelTest    = 0x04 ,//试纸施加血样后测试未完成，被退出试纸
+    BloodSugarErrorCodePassError     = 0x05 ,//机器自检未通过
+    BloodSugarErrorCodeLow           = 0x06 ,//测量结果过低，超出测量范围
+    BloodSugarErrorCodeHigh          = 0x07 ,//测量结果过高，超出测量范围,
+};
+
+
+#endif /* ELBloodSugarBleHeader_h */

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELBloodSugarBleManager.h

+//
+//  ELBloodSugarBleManager.h
+//  Elink
+//
+//  Created by iot_user on 2020/7/7.
+//  Copyright © 2020 iot_iMac. All rights reserved.
+//
+
+#import <AILinkBleSDK/ELBluetoothManager.h>
+#import "ELBloodSugarBleHeader.h"
+
+NS_ASSUME_NONNULL_BEGIN
+
+@protocol BloodSugarBleDelegate <NSObject>
+
+@optional
+
+/// 蓝牙连接状态
+/// @param state 连接状态
+-(void)bloodSugarBleReceiveState:(ELBluetoothState)state;
+
+/// 附近的八电极设备
+/// @param devices 八电极设备列表
+-(void)bloodSugarBleReceiveDevices:(NSArray<ELPeripheralModel *> *)devices;
+
+/// 回调设备状态
+/// @param status 状态
+-(void)bloodSugarBleReceiveDeviceStatus:(BloodSugarDeviceStatus)status;
+
+/// 回调测量结果数据
+/// @param data 数据
+-(void)bloodSugarBleReceiveTestData:(BloodSugarDataStruct)data;
+
+/// 回调设置单位的结果
+/// @param result 结果
+-(void)bloodSugarBleReceiveSwitchUnitResult:(ELSetBluetoothResponseType)result;
+
+/// 上报错误码
+/// @param errorCode 错误码 
+-(void)bloodSugarBleReceiveErrorCode:(BloodSugarErrorCode)errorCode;
+
+///返回原始数据
+- (void)bloodSugarBleBackManufactureData:(NSData *)data;
+
+@end
+
+
+@interface ELBloodSugarBleManager : ELBluetoothManager
+
+@property (nonatomic, weak) id<BloodSugarBleDelegate> bloodSugarDelegate;
+
+
++(instancetype)shareManager;
+
+
+
+//查询设备状态
+-(void)bloodSugarQueryDeviceStatus;
+
+//切换单位
+-(void)bloodSugarSwitchUnit:(ELDeviceBloodSugarUnit)unit;
+@end
+
+NS_ASSUME_NONNULL_END

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELBluetoothManager.h

  */
 -(void)bluetoothManagerReceivePassData:(NSData *_Nullable)data;
 
+/** 回调已经连接到系统的设备 */
+//- (void)bluetoothManagerLinkedSysPeripheral:(NSArray *_Nonnull)peripherals;
 
 #pragma mark ============ A6 Set or query the callback of the instruction execution result（设置或查询指令执行结果的回调） ==============
 /**
 @property (nonatomic, weak) id<ELBleBroadcastDelegate> broadDelegate;
 
 
+/** 需要搜索与系统绑定的蓝牙设备 */
+@property (nonatomic, assign) BOOL needScanBindSysDevice;
+
 //设置appkey和secret
 +(void)setAppKey:(NSString *)key appSecret:(NSString *)secret;
 
 
 //Start scanning（开始扫描）
 -(void)startScan;
+//Start scanning all (开始扫描附近所有设备)
+- (void)startScanAll;
 //Stop scanning（停止扫描）
 -(void)stopScan;
 //Connecting device（连接设备）
 /// @param data Transparent data(透传数据)
 -(void)bluetoothReceivePassData:(NSData *)data;
 
+/** 滑板车专用,返回设备消息推送内容 */
+- (void)bluetoothManagerScooterMessageWithUUID:(NSString *)uuid data:(NSData *)data;
+
 //Broadcast equipment dedicated（广播设备专用）
 /// Broadcast device data
 /// @param cid cid
  */
 -(void)setMCUNowDateWithEnable:(BOOL)enable;
 
+//同步系统时间到mcu
+-(void)syncMCUNowDate;
+
 /**
  Setting CID, VID, PID（设置CID、VID、PID）
 

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELBodyFatScaleBleHeader.h

     ELBodyFatScaleBleDataType_AppSendUnit                   = 0x81 ,
     /** MCU发送体脂数据给App,发送完毕(一次完整测量结束) */
     ELBodyFatScaleBleDataType_MCUBackSendUnitResult         = 0x82 ,
-    
     /** 数据传输结束指令 */
     ELBodyFatScaleBleDataType_ReceivedDataResult            = 0xFE ,
-    
     /** 设备上发错误码 */
     ELBodyFatScaleBleDataType_MCUBackErrorCode              = 0xFF ,
 };

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELBodyFatScaleBleManager.h

  @param bodyModel 体脂数据
  */
 -(void)bodyFatScaleManagerCallBackBleUserHistoryDataModel:(ELBodyFatScaleBleUserModel *)user bodyDataModel:(ELBodyFatScaleBleWeightModel *)bodyModel;
-
 @end
 
 
 
 
 #pragma mark ============ 下发A7指令 ==============
-
 - (void)changeBodyFatScaleUnit:(ELDeviceWeightUnit)unit;
-
 - (void)sendCurrentUserToBle:(ELBodyFatScaleBleUserModel *)usr;
 
 -(void)sendReceivedDataResult:(BOOL)result;

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELBodyFatScaleBleUserModel.h

  */
 @interface ELBodyFatScaleBleUserModel : NSObject
 
-@property (nonatomic, assign) NSUInteger createTime;
+@property (nonatomic, assign) long long createTime;
 @property (nonatomic, assign) NSUInteger usrID;
 @property (nonatomic, assign) BodyFatScaleRole role;    //角色
 @property (nonatomic, assign) ELBluetoothUserSex sex;      //性别

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELBodyFatScaleBleWeightModel.h

 ///Protein rate, need / 10(蛋白率,需要/10)
 @property (nonatomic, assign) NSUInteger pp;
 ///Creation time with an accuracy of 1(创建时间,精度为1)
-@property (nonatomic, assign) NSUInteger createTime;
+@property (nonatomic, assign) long long createTime;
 ///Impedance, accuracy is 1(阻抗,精度为1)
 @property (nonatomic, assign) NSUInteger adc;
 ///Heart rate with an accuracy of 1(心率,精度为1)

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELForeheadBleDataModel.h

 @property (nonatomic, assign) NSString * temperature;//温度
 @property (nonatomic, assign) ELDeviceTemperatureUnit unit;//单位
 @property (nonatomic, assign) NSInteger point;//小数点
-@property (nonatomic, assign) NSInteger createTime;//时间
+@property (nonatomic, assign) long long createTime;//时间
 
 
 @end

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELHeightGaugeBleDataModel.h

 @property (nonatomic, assign)   NSUInteger heightPoint; //decimal
 @property (nonatomic, assign)   ELDeviceHeightUnit heightUnit;//单位
 
-@property (nonatomic, assign)   NSInteger createTime;//时间
+@property (nonatomic, assign)   long long createTime;//时间
 
 
 @end

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELHeightGaugeBleManager.h

  call back fail code
  */
 -(void)heightGaugeBleManagerReceiveFailCode:(ELHeightGaugeFailCode)code;
+
 @end
 
 

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELOximeterBleManager.h

+//
+//  ELOximeterBleManager.h
+//  Elink
+//
+//  Created by cliCk on 2020/11/16.
+//  Copyright © 2020 iot_iMac. All rights reserved.
+//
+
+#import <AILinkBleSDK/ELBluetoothManager.h>
+#import "ELOximeterBleModel.h"
+#import "ELOximeterDeviceModel.h"
+
+NS_ASSUME_NONNULL_BEGIN
+
+/** 血氧仪获取app设备状态类型定义 */
+typedef NS_ENUM(NSInteger, OximeterBleDataType) {
+    /** app获取设备状态 */
+    OximeterBleDataType_AppGetDeviceState        = 0x01 ,
+    /** muc上报设置信息 */
+    OximeterBleDataType_McuUploadSetupState      = 0x03 ,
+    /** APP设置报警值 */
+    OximeterBleDataType_AppSetupAlarm            = 0x04 ,
+    /** muc回复报警值设置结果 */
+    OximeterBleDataType_McuReplyAlarmResult      = 0x05 ,
+    /** 设备上报错误码 */
+    OximeterBleDataType_DeviceUploadErrorCode    = 0xFF ,
+};
+
+/** 血氧仪测量标识符 */
+typedef NS_ENUM(NSInteger, OximeterTestMarkType) {
+    /** 开始测量 */
+    OximeterTestMarkType_StartTest               = 0x00 ,
+    /** 测量中 */
+    OximeterTestMarkType_Testing                        ,
+    /** 结束测量 */
+    OximeterTestMarkType_EndTest                 = 0xFF ,
+};
+
+/** 血氧仪设备上报错误码 */
+typedef NS_ENUM(NSInteger, OximeterErrorCodeType) {
+    /** 血氧饱和率不稳定 */
+    OximeterErrorCodeType_UnstableBloodOxygenSaturationRate     = 0 ,
+    /** 脉率不稳定 */
+    OximeterErrorCodeType_UnstablePulseRate                         ,
+    /** 测量出错 */
+    OximeterErrorCodeType_TestWrong                                 ,
+    /** 设备低电 */
+    OximeterErrorCodeType_DeviceLowPower                            ,
+};
+
+@protocol ELOximeterBleDelegate <NSObject>
+
+/** 回调蓝牙状态 */
+- (void)oximeterManagerBleState:(ELBluetoothState)state;
+
+/** 回调搜索到的血氧仪设备 */
+- (void)oximeterManagerScanDevices:(NSArray<ELOximeterDeviceModel *> *)devices;
+
+/** mcu上报设置信息 */
+- (void)oximeterManagerSetupState:(ELOximeterBleModel *)bleModel markType:(enum OximeterTestMarkType)markType;
+
+/** mcu回复报警设置结果 */
+- (void)oximeterManagerReplyAlarmSetupState:(BOOL)setupState;
+
+/** 设备上报错误码 */
+- (void)oximeterManagerUploadErrorCode:(enum OximeterErrorCodeType)codeType;
+
+///返回原始数据
+- (void)oximeterManagerBleBackManufactureData:(NSData *)data;
+
+@end
+
+@interface ELOximeterBleManager : ELBluetoothManager
+
+@property (nonatomic, weak) id<ELOximeterBleDelegate> oximeterBleDelegate;
+
++ (ELOximeterBleManager *)shareManager;
+
+/** APP 获取设备状态 */
+- (void)sendToBleWithGetDeviceStaus;
+
+/** APP设置报警值 (设置负数则表示该值无效) */
+- (void)sendToBleSetupAlarmNumberWithSpO2Upper:(NSInteger)Spo2Upper spo2Lower:(NSInteger)Spo2Lower prUpper:(NSInteger)PRUpper prLower:(NSInteger)PRLower piUpper:(NSInteger)PIUpper piLower:(NSInteger)PILower;
+
+@end
+
+NS_ASSUME_NONNULL_END

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELOximeterBleModel.h

+//
+//  ELOximeterBleModel.h
+//  Elink
+//
+//  Created by cliCk on 2020/11/16.
+//  Copyright © 2020 iot_iMac. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+
+#define ELOximeter_Max_Pleth 1000.0f
+#define ELOximeter_Min_Pleth 0.0f
+
+NS_ASSUME_NONNULL_BEGIN
+
+@interface ELOximeterBleModel : NSObject
+
+/** 血氧（%）0-100 %，若该值无效则为负数 */
+@property (nonatomic, assign) NSInteger SpO2;
+
+/** 脉率（bpm）0-250 */
+@property (nonatomic, assign) NSInteger pulseRate;
+
+/** PI （血流灌注指数， 无单位 ， 1 位小数） 0-254（对应 0.0-25.4）*/
+@property (nonatomic, assign) NSInteger pi;
+
+/** 电量（%）（power ，单位%） 0-100 */
+@property (nonatomic, assign) NSInteger power;
+/** 呼吸频率 Respiratory Rate（RR/min ，大端序，一位小数点）0.0-100.0 若该值无效，则为 0xFFFF*/
+@property (nonatomic, assign) NSInteger rrValue;
+/**脉率曲线值（ Plethysmogram 体积描记图，大端序） 0-0xFFFE 若该值无效，则为 0xFFFF*/
+@property (nonatomic, assign) NSInteger pleth;
+/**脉率曲线波谷（棒图，大端序，暂时废弃不用） 0-0xFFFF 若该值无效，则为 0xFFFF*/
+@property (nonatomic, assign) NSInteger pleth2;
+/**佩戴状态 0：未佩戴 1：已佩戴*/
+@property (nonatomic, assign) NSInteger wearState;
+ 
+@end
+
+NS_ASSUME_NONNULL_END

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELOximeterDeviceModel.h

+//
+//  ELOximeterDeviceModel.h
+//  Elink
+//
+//  Created by cliCk on 2020/11/16.
+//  Copyright © 2020 iot_iMac. All rights reserved.
+//
+
+#import <AILinkBleSDK/ELPeripheralModel.h>
+
+NS_ASSUME_NONNULL_BEGIN
+
+@interface ELOximeterDeviceModel : ELPeripheralModel
+
+@end
+
+NS_ASSUME_NONNULL_END

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELPeripheralModel.h

  */
 @property(nonatomic, assign) BOOL  paired;
 
+/** 广播秤的广播数据 */
+@property (nonatomic, strong) NSData *manufactureData;
+
 /**
  Screening equipment（筛选设备）
 

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELSDKHeader.h

     ELInetSetCmdTypeSetHandshake             = 0x23, //Encrypted handshake data returned by Bluetooth(蓝牙返回的加密的握手数据)
     ELInetSetCmdTypeSetKey                   = 0x31, //APP sends the decoding key(APP下发解码秘钥)
     ELInetSetCmdTypeSetSmartLockA6Data       = 0x34, //Door lock 0x34 represents the A6 protocol (see the second level command for details)(门锁0x34代表A6协议（具体见二级指令）)
+    ELInetSetCmdTypeSyncMCUNowDate           = 0x37, //Sync the current time of the system(设置系统当前时间)
 #pragma mark ============ 蓝牙Wifi ==============
     ELInetSetCmdTypeBleWifiSetWifiMac        = 0x84, //设置WIFI Mac地址
     ELInetSetCmdTypeBleWifiSetWifiPwd        = 0x86, //设置WIFI 密码
     ELSupportDeviceTypeBLE_EightScale = 0x0013 ,     //Eight electrode scale（八电极蓝牙秤）
     ELSupportDeviceTypeAnemometer     = 0x0014 ,     //anemometer（风速计）,0x0015
     ELSupportDeviceTypeClampMeter     = 0x0015 ,     //clamp meter(钳表)
+    ELSupportDeviceTypeOximeter       = 0x0021 ,     //Oximeter （血氧仪）
     ELSupportDeviceTypeWatch          = 0x001D ,     //华盛达手表
     
     ELSupportDeviceTypeBloodSugar     = 0x001C ,     //blood sugar(血糖仪)
-    ELSupportDeviceTypeBroadcastScale = 65536  ,     //Broadcast body fat scale(广播体脂秤)
+    ELSupportDeviceTypeInfThermt      = 0x0020 ,     //Infrared Thermometer(红外测温仪)
+    ELSupportDeviceTypeFaceMask       = 0x0022 ,     //face mask(智能口罩)
+    
+    ELSupportDeviceTypeElectricScooter= 0x0025 ,     //滑板车
+    
+    ELSupportDeviceTypeBroadcastScale = (0xffff +0x01)  ,     //655536 Broadcast body fat scale(AILink广播体脂秤)
+    ELSupportDeviceTypeBroadcastScale_Lingyang = (0xffff +0x16)  ,     //65557 凌阳广播体脂秤
     
     
 };
     ELDeviceHeightUnit_Fail          = 0xFF ,
 };
 
+#define AiLinkBleSpeedUnit_M_S      @"m/s"
+#define AiLinkBleSpeedUnit_KM_H     @"km/h"
+#define AiLinkBleSpeedUnit_FT_Min   @"ft/min"
+#define AiLinkBleSpeedUnit_Knots    @"knots"
+#define AiLinkBleSpeedUnit_MPH      @"MPH"
+
+#define AiLinkBleSpeedUnitDic  @{@(ELDeviceSpeedUnit_M_S):AiLinkBleSpeedUnit_M_S,@(ELDeviceSpeedUnit_KM_H):AiLinkBleSpeedUnit_KM_H,@(ELDeviceSpeedUnit_FT_Min):AiLinkBleSpeedUnit_FT_Min,@(ELDeviceSpeedUnit_Knots):AiLinkBleSpeedUnit_Knots,@(ELDeviceSpeedUnit_MPH):AiLinkBleSpeedUnit_MPH}
+
+/** AiLink速度单位 */
+typedef NS_ENUM(NSInteger, ELDeviceSpeedUnit) {
+    /** m/s */
+    ELDeviceSpeedUnit_M_S       = 0x00 ,
+    /** km/h */
+    ELDeviceSpeedUnit_KM_H      = 0x01 ,
+    /** ft/min */
+    ELDeviceSpeedUnit_FT_Min    = 0x02 ,
+    /** knots（节，海里/小时，1节=1海里/小时=1.852公里/小时） */
+    ELDeviceSpeedUnit_Knots     = 0x03 ,
+    /** MPH（1 迈= 1.609344 千米/小时） */
+    ELDeviceSpeedUnit_MPH       = 0x04 ,
+    /** Unsupported unit */
+    ELDeviceSpeedUnit_Fail      = 0xFF ,
+};
+
 #define AiLinkBleTempUnit_CStr @"℃"
 
 #define AiLinkBleTempUnit_FStr @"℉"
 };
 
 
-
 #pragma mark ============ 枚举 ==============
 typedef NS_ENUM(NSUInteger, ELBluetoothState) {
     ELBluetoothStateUnavailable,                  //Bluetooth is not available（蓝牙不可用）

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELThermometerBleModel.h

 
 @property (nonatomic,assign) ELDeviceTemperatureUnit unit;//单位
 @property (nonatomic,assign) NSUInteger temperature;//温度
-@property (nonatomic,assign) BOOL dataType;//Stability flag: 0 real-time data, 1 stable data(稳定标志：0 实时数据，1 稳定数据)
+///Stability flag: 0 real-time data, 1 stable data(稳定标志：0 实时数据，1 稳定数据)
+@property (nonatomic,assign) BOOL dataType;
 @property (nonatomic,copy) NSString *unitStr;
 @property (nonatomic,assign) NSInteger tempPoint;   //小数点偏移位置
 

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELUnitConvertTool.h

 //
 
 #import <Foundation/Foundation.h>
+#import "ELWeightAlgorithmusModel.h"
+#import "ELHeightAlgorithmusModel.h"
 #import "ELSDKHeader.h"
 
-#define StLbSymbol              @":"
-#define FeetSymbol              @"′"
-#define InchSymbol              @"″"
+#define StLbSymbol              WeightUnitST_LBDelimiter
+#define FeetSymbol              ELHeightFeetSymbol
+#define InchSymbol              ELHeightInchSymbol
 
-#define KG_LB_CONST     2.2046226f
-#define ST_LB_CONST     14.0f
+#define KG_LB_CONST     ELWeightKG_LB_CONST
+#define ST_LB_CONST     ELWeightST_LB_CONST
 
-#define INCH_CM_CONST       2.54f
-#define FEET_INCH_CONST     12.0f
+#define INCH_CM_CONST       ELHeight_INCH_CM_CONST
+#define FEET_INCH_CONST     ELHeight_FEET_INCH_CONST
 
 
 @interface ELUnitConvertTool : NSObject

AILinkBleSDKDemo/AILinkBleSDK.framework/Headers/ELWheelMonitorBleModel.h

 
 @property (nonatomic, assign) WheelMonitorDeviceState state;//状态
 
-@property (nonatomic, assign) NSInteger createTime;
+@property (nonatomic, assign) long long createTime;
 
 
 /**

AILinkBleSDKDemo/AILinkBleSDK.framework/_CodeSignature/CodeResources

 		</data>
 		<key>Headers/ELBloodBleDataModel.h</key>
 		<data>
-		DpRqeBN9ZsF9qYH3I3sP2RuP2WQ=
+		eFs51BF/ppCE5WcQ8HHDX+Cou+M=
 		</data>
 		<key>Headers/ELBloodBleManager.h</key>
 		<data>
 		<data>
 		N2ScrY3zUXS4vLeY/b3xtcPA5J8=
 		</data>
+		<key>Headers/ELBloodSugarBleHeader.h</key>
+		<data>
+		sSSl1XdvJ7StT2NBA3UwRBA7n2s=
+		</data>
+		<key>Headers/ELBloodSugarBleManager.h</key>
+		<data>
+		/JDO/VrHWGMvmkaxB8nxfWrXLTI=
+		</data>
 		<key>Headers/ELBluetoothManager.h</key>
 		<data>
-		OKd3bjWNKh/sFutes+/VnWz96Vw=
+		FfkgpftyVeFmj4RLFFezPcUCZBg=
 		</data>
 		<key>Headers/ELBodyFatScaleBleHeader.h</key>
 		<data>
-		d9CouBwRoqMKUrT+iiS0UztzPo4=
+		K10MLRjyNYPq98CurWPiRMoM0BI=
 		</data>
 		<key>Headers/ELBodyFatScaleBleManager.h</key>
 		<data>
-		aOe/Psooxp0TUxRdLYUmY7I7VrA=
+		J2a+FTe8dPtuKxb324Ut7ciHpgk=
 		</data>
 		<key>Headers/ELBodyFatScaleBleUserModel.h</key>
 		<data>
-		MBQ6uNFIQp9eH5QYseXEn9u8XSs=
+		pXrH0MkTmqzJCV2VEIbJ0j6NWy8=
 		</data>
 		<key>Headers/ELBodyFatScaleBleWeightModel.h</key>
 		<data>
-		ACYbuCI3GXFXuNHirYhKf1nx9Jk=
+		VAGOOV9Fd2X3m1leujKzrXeX8P0=
 		</data>
 		<key>Headers/ELBodyFatScaleDeviceModel.h</key>
 		<data>
 		</data>
 		<key>Headers/ELForeheadBleDataModel.h</key>
 		<data>
-		5pOOuuEZPUiCO8mC+8RieX0ZktE=
+		vJf8Kumcj7+fwHBz3oVMfiyPhe4=
 		</data>
 		<key>Headers/ELForeheadHeader.h</key>
 		<data>
 		</data>
 		<key>Headers/ELHeightGaugeBleDataModel.h</key>
 		<data>
-		B+jv5YT79HhyGg7UL0jGn0SAvdg=
+		KPPqCtkvCTd6G9/Zw6zajhOH+m4=
 		</data>
 		<key>Headers/ELHeightGaugeBleManager.h</key>
 		<data>
-		fI+CN9ThacjPbLrkT67I1KEp7do=
+		wdzddZ39Cit+0xT8McKuVmL9Im0=
 		</data>
 		<key>Headers/ELHeightGaugeHeader.h</key>
 		<data>
 		ame1lW5x3LyjrTa2tD/aBjA8Cfw=
 		</data>
+		<key>Headers/ELOximeterBleManager.h</key>
+		<data>
+		T1p75yjnCsmP4b1CtOMSWKKCRY8=
+		</data>
+		<key>Headers/ELOximeterBleModel.h</key>
+		<data>
+		nU8MGOLvjE3KLxVYd4OLx5ufD5g=
+		</data>
+		<key>Headers/ELOximeterDeviceModel.h</key>
+		<data>
+		rkMgDu0gbnQiKOb+V93KIzvn3lI=
+		</data>
 		<key>Headers/ELPeripheralModel.h</key>
 		<data>
-		2BPYSJlX2e5+zoPjDDF0b+rGgEc=
+		mBy0FHI/hyo/SrglrOG3sO6rAGE=
 		</data>
 		<key>Headers/ELRemoteControlBleHeader.h</key>
 		<data>
 		</data>
 		<key>Headers/ELSDKHeader.h</key>
 		<data>
-		GKs3bfL6dryCrnD+GMedQhIEAU4=
+		qG//usgqXXqSonMmz5XWHUiq7oQ=
 		</data>
 		<key>Headers/ELTempAlgorithmusModel.h</key>
 		<data>
 		</data>
 		<key>Headers/ELThermometerBleModel.h</key>
 		<data>
-		gfcdH3dOdDIjBaU0lbhAsuqSDQU=
+		WF60Fo1A0P/luh3JNoHFUy9Rsyw=
 		</data>
 		<key>Headers/ELThermometerDeviceModel.h</key>
 		<data>
 		</data>
 		<key>Headers/ELUnitConvertTool.h</key>
 		<data>
-		KUvTJzAj6UgO0TVIag6jroPEZ9g=
+		cnvOnUbUQ4f/0gTSgIOjlBXUN6Y=
 		</data>
 		<key>Headers/ELWeightAlgorithmusModel.h</key>
 		<data>
 		</data>
 		<key>Headers/ELWheelMonitorBleModel.h</key>
 		<data>
-		33QcqrJFFbKEYqLTPl0GvIq3/4c=
+		4icY11fLvCNl3xkTUUVJ52Mvc3E=
 		</data>
 		<key>Info.plist</key>
 		<data>
-		UMqEsWdtMOlMnusqzTciLhNvrrg=
+		RLIicikwX4wLnY8yDfRTzcPecII=
 		</data>
 	</dict>
 	<key>files2</key>
 		<dict>
 			<key>hash</key>
 			<data>
-			DpRqeBN9ZsF9qYH3I3sP2RuP2WQ=
+			eFs51BF/ppCE5WcQ8HHDX+Cou+M=
 			</data>
 			<key>hash2</key>
 			<data>
-			MQxwbR+wSqYSadxV6Wy7ODXlaFYZDwSs8J15eSLT3BI=
+			yNfYPqbI+KW+wfhT17OQ9muTO6XvNaiHyGH8Mw1yHv4=
 			</data>
 		</dict>
 		<key>Headers/ELBloodBleManager.h</key>
 			DJIEwcPb2L+C8PWkXoK8ChDmrREy1z4j+KIPlU/Pxv8=
 			</data>
 		</dict>
+		<key>Headers/ELBloodSugarBleHeader.h</key>
+		<dict>
+			<key>hash</key>
+			<data>
+			sSSl1XdvJ7StT2NBA3UwRBA7n2s=
+			</data>
+			<key>hash2</key>
+			<data>
+			i2pc7K838/njJA50EWsu8/Pkw23P1RyBp7Oqlui5XJg=
+			</data>
+		</dict>
+		<key>Headers/ELBloodSugarBleManager.h</key>
+		<dict>
+			<key>hash</key>
+			<data>
+			/JDO/VrHWGMvmkaxB8nxfWrXLTI=
+			</data>
+			<key>hash2</key>
+			<data>
+			3FVhuleEqCZXSdsFd5XIyo+fvq6CXLsC8g9GspAyqm0=
+			</data>
+		</dict>
 		<key>Headers/ELBluetoothManager.h</key>
 		<dict>
 			<key>hash</key>
 			<data>
-			OKd3bjWNKh/sFutes+/VnWz96Vw=
+			FfkgpftyVeFmj4RLFFezPcUCZBg=
 			</data>
 			<key>hash2</key>
 			<data>
-			x8MeFX59REfQRNAyQC/13C+sAIxFfiEbHM5QSmqs1Ts=
+			IifOuhf8BH3YyoDF6L9+9AO/47rw2eArZ1qUHEHXkjw=
 			</data>
 		</dict>
 		<key>Headers/ELBodyFatScaleBleHeader.h</key>
 		<dict>
 			<key>hash</key>
 			<data>
-			d9CouBwRoqMKUrT+iiS0UztzPo4=
+			K10MLRjyNYPq98CurWPiRMoM0BI=
 			</data>
 			<key>hash2</key>
 			<data>
-			pKjb8UqI7IWcu3tjnBMSvE5QrbjyydIEe/CiN7dzs+g=
+			NA+FRVsNPBLWRjAhMxRcDX2YCcywzySkkl0cx4Unydk=
 			</data>
 		</dict>
 		<key>Headers/ELBodyFatScaleBleManager.h</key>
 		<dict>
 			<key>hash</key>
 			<data>
-			aOe/Psooxp0TUxRdLYUmY7I7VrA=
+			J2a+FTe8dPtuKxb324Ut7ciHpgk=
 			</data>
 			<key>hash2</key>
 			<data>
-			yP0Y2J8Opesx6PnzjJRowY6jVqShxqay2AO3JlakpkY=
+			Pvn5qz/TE6j/lEvuZdPfjbXNnbPWHnophYlLEsKkr0I=
 			</data>
 		</dict>
 		<key>Headers/ELBodyFatScaleBleUserModel.h</key>
 		<dict>
 			<key>hash</key>
 			<data>
-			MBQ6uNFIQp9eH5QYseXEn9u8XSs=
+			pXrH0MkTmqzJCV2VEIbJ0j6NWy8=
 			</data>
 			<key>hash2</key>
 			<data>
-			EhqjKgLFWoipLPU+hDqAOmsB8L3eapoVCS+dq4P+f8g=
+			jLDK10ZJ8OC0hKShlSFlthn+N4nlGyEX9b/1U66ZLd4=
 			</data>
 		</dict>
 		<key>Headers/ELBodyFatScaleBleWeightModel.h</key>
 		<dict>
 			<key>hash</key>
 			<data>
-			ACYbuCI3GXFXuNHirYhKf1nx9Jk=
+			VAGOOV9Fd2X3m1leujKzrXeX8P0=
 			</data>
 			<key>hash2</key>
 			<data>
-			MJq+xb+X8LJ7f1ynJoK0wMQHkQ845EDay2JyAHuMN/E=
+			MrCz1mNPm+FW4lCPh6W9Q9MgC5OTGiuBiHfaxdyJ48U=
 			</data>
 		</dict>
 		<key>Headers/ELBodyFatScaleDeviceModel.h</key>
 		<dict>
 			<key>hash</key>
 			<data>
-			5pOOuuEZPUiCO8mC+8RieX0ZktE=
+			vJf8Kumcj7+fwHBz3oVMfiyPhe4=
 			</data>
 			<key>hash2</key>
 			<data>
-			OT0VXqsUYZUY7X+MRujUaoJEDRFRUoaeIOwn2ZeVlpU=
+			SNvY1vLwoZVMANNWuef7yeSLTUMnCZRzkynyqwIPBv0=
 			</data>
 		</dict>
 		<key>Headers/ELForeheadHeader.h</key>
 		<dict>
 			<key>hash</key>
 			<data>
-			B+jv5YT79HhyGg7UL0jGn0SAvdg=
+			KPPqCtkvCTd6G9/Zw6zajhOH+m4=
 			</data>
 			<key>hash2</key>
 			<data>
-			LTE74gs3V3TrNvclF3YfurebOuZ/6SGGdbunw0bZKxk=
+			TUFTZGXqGi5yzOeJzRpDu7vMoAqfsVd9EFz4SFW71Xs=
 			</data>
 		</dict>
 		<key>Headers/ELHeightGaugeBleManager.h</key>
 		<dict>
 			<key>hash</key>
 			<data>
-			fI+CN9ThacjPbLrkT67I1KEp7do=
+			wdzddZ39Cit+0xT8McKuVmL9Im0=
 			</data>
 			<key>hash2</key>
 			<data>
-			DC+5AXDTzQwo3qk4gZsG2XUZGcnJEbh5+uGEqYMEFk8=
+			gdE2eyETLgvL7aZCeFgu3mtsmZX2kTu66DlpPN0cNMw=
 			</data>
 		</dict>
 		<key>Headers/ELHeightGaugeHeader.h</key>
 			cGlFpjbfDm88HxwGHZsIk5PD17XWUnkyEUNeaM8BALk=
 			</data>
 		</dict>
+		<key>Headers/ELOximeterBleManager.h</key>
+		<dict>
+			<key>hash</key>
+			<data>
+			T1p75yjnCsmP4b1CtOMSWKKCRY8=
+			</data>
+			<key>hash2</key>
+			<data>
+			BSVKr+dlDK1bjTeYuFGTRFhR2WGhSl4bRYBfKw6pnKE=
+			</data>
+		</dict>
+		<key>Headers/ELOximeterBleModel.h</key>
+		<dict>
+			<key>hash</key>
+			<data>
+			nU8MGOLvjE3KLxVYd4OLx5ufD5g=
+			</data>
+			<key>hash2</key>
+			<data>
+			NSN3dB7IXdkK8VOoPFVmHsm5nazAzRnbCoxUDVvwGGk=
+			</data>
+		</dict>
+		<key>Headers/ELOximeterDeviceModel.h</key>
+		<dict>
+			<key>hash</key>
+			<data>
+			rkMgDu0gbnQiKOb+V93KIzvn3lI=
+			</data>
+			<key>hash2</key>
+			<data>
+			zuuTj+npaoe7wUHAqB68UEWtl1UmT2nLlu8oOksIqWw=
+			</data>
+		</dict>
 		<key>Headers/ELPeripheralModel.h</key>
 		<dict>
 			<key>hash</key>
 			<data>
-			2BPYSJlX2e5+zoPjDDF0b+rGgEc=
+			mBy0FHI/hyo/SrglrOG3sO6rAGE=
 			</data>
 			<key>hash2</key>
 			<data>
-			zVdvk9EguhJ4yIkagDVl0cB3uFLBEowO4ly8JecN8ks=
+			AkdtV2tT7Agyv2ik6kSKz8kKJi042apMwxEVcXPyKkI=
 			</data>
 		</dict>
 		<key>Headers/ELRemoteControlBleHeader.h</key>
 		<dict>
 			<key>hash</key>
 			<data>
-			GKs3bfL6dryCrnD+GMedQhIEAU4=
+			qG//usgqXXqSonMmz5XWHUiq7oQ=
 			</data>
 			<key>hash2</key>
 			<data>
-			r1aQIPZs0NMAPNezCmkWE4KzH9wD+DmKAafzpwOqjrg=
+			WUXTSBI1wntrAmPRzaqcAYLRQH4QswBL/nYgOHOB05A=
 			</data>
 		</dict>
 		<key>Headers/ELTempAlgorithmusModel.h</key>
 		<dict>
 			<key>hash</key>
 			<data>
-			gfcdH3dOdDIjBaU0lbhAsuqSDQU=
+			WF60Fo1A0P/luh3JNoHFUy9Rsyw=
 			</data>
 			<key>hash2</key>
 			<data>
-			ay1fe+kwQGlcxg6zWWv0Z9h+hZdIiWcqkXaWmfHUfKQ=
+			3ZijZcITdb4zEUbac9UkE3siVGW3EUbEBTxIEQsHq64=
 			</data>
 		</dict>
 		<key>Headers/ELThermometerDeviceModel.h</key>
 		<dict>
 			<key>hash</key>
 			<data>
-			KUvTJzAj6UgO0TVIag6jroPEZ9g=
+			cnvOnUbUQ4f/0gTSgIOjlBXUN6Y=
 			</data>
 			<key>hash2</key>
 			<data>
-			m9kGIMT+Hyb5vxlcF8hsbi4cmg8IWW0u1d690GOSIqA=
+			HrGjVy8jQew0b8H6b/KDvB7a6iEw/HPpK8PO46yEokU=
 			</data>
 		</dict>
 		<key>Headers/ELWeightAlgorithmusModel.h</key>
 		<dict>
 			<key>hash</key>
 			<data>
-			33QcqrJFFbKEYqLTPl0GvIq3/4c=
+			4icY11fLvCNl3xkTUUVJ52Mvc3E=
 			</data>
 			<key>hash2</key>
 			<data>
-			3x0+7c3+zhAdZCb2nagaiXYx5O2P124ki7PJrSqjxUI=
+			Bn3FIqM7yQPVawU2zfEXrpeb1z/rM0sbHlhNRW8KyRg=
 			</data>
 		</dict>
 	</dict>

AILinkBleSDKDemo/BabyScale/BabyScaleViewController.m

     }
     return _tableView;
 }
--(void)dealloc{
-    [[ELBabyScaleBleManager shareManager] stopScan];
-}
+
 @end

AILinkBleSDKDemo/BloodSugar/BloodSugarConnectionViewController.h

+//
+//  BloodSugarConnectionViewController.h
+//  AILinkBleSDKSourceCode
+//
+//  Created by cliCk on 2021/1/28.
+//  Copyright © 2021 IOT. All rights reserved.
+//
+
+#import <UIKit/UIKit.h>
+@class ELPeripheralModel;
+
+NS_ASSUME_NONNULL_BEGIN
+
+@interface BloodSugarConnectionViewController : UIViewController
+
+@property (nonatomic, strong) ELPeripheralModel *p;
+
+@end
+
+NS_ASSUME_NONNULL_END

AILinkBleSDKDemo/BloodSugar/BloodSugarConnectionViewController.m

+//
+//  BloodSugarConnectionViewController.m
+//  AILinkBleSDKSourceCode
+//
+//  Created by cliCk on 2021/1/28.
+//  Copyright © 2021 IOT. All rights reserved.
+//
+
+#import "BloodSugarConnectionViewController.h"
+#import "Masonry.h"
+#import <AILinkBleSDK/ELBloodSugarBleHeader.h>
+#import <AILinkBleSDK/ELBloodSugarBleManager.h>
+
+@interface BloodSugarConnectionViewController () <BloodSugarBleDelegate, ELBluetoothManagerDelegate>
+@property (nonatomic, strong) UITextView *textView;
+
+@property (nonatomic, copy) NSArray<NSNumber *> *units;
+
+@property (nonatomic, strong) UIButton *connectButton;
+@end
+
+@implementation BloodSugarConnectionViewController
+
+- (void)viewDidLoad {
+    [super viewDidLoad];
+    // Do any additional setup after loading the view.
+    
+    self.view.backgroundColor = [UIColor whiteColor];
+    [ELBloodSugarBleManager shareManager].bloodSugarDelegate = self;
+    [ELBloodSugarBleManager shareManager].delegate = self;
+    [[ELBloodSugarBleManager shareManager] connectPeripheral:self.p];
+    
+    [self setupUIView];
+}
+
+- (void)viewWillDisappear:(BOOL)animated {
+    [[ELBloodSugarBleManager shareManager] disconnectPeripheral];
+}
+
+-(void)addLog:(NSString *)log{
+    self.textView.text = [NSString stringWithFormat:@"%@\n\n%@",log,self.textView.text];
+}
+
+- (void)connectDevice {
+    [[ELBloodSugarBleManager shareManager] startScan];
+}
+
+- (void)setupUIView {
+    
+    self.connectButton = [[UIButton alloc] initWithFrame:CGRectMake((self.view.frame.size.width-100)/2, 88, 100, 40)];
+    [self.connectButton setTitle:@"点击重连" forState:UIControlStateNormal];
+    [self.connectButton setTitleColor:[UIColor blackColor] forState:UIControlStateNormal];
+    [self.view addSubview:self.connectButton];
+    [self.connectButton addTarget:self action:@selector(connectDevice) forControlEvents:UIControlEventTouchUpInside];
+    self.connectButton.hidden = YES;
+    
+    self.textView = [[UITextView alloc] init];
+    self.textView.backgroundColor = [UIColor blackColor];
+    self.textView.text = @"Log";
+    self.textView.textColor = [UIColor redColor];
+    [self.view addSubview:self.textView];
+    [self.textView mas_makeConstraints:^(MASConstraintMaker *make) {
+        make.left.mas_equalTo(10);
+        make.right.mas_equalTo(-10);
+        make.bottom.offset(-44);
+//        make.height.mas_equalTo(350);
+        make.top.offset(150);
+    }];
+}
+
+#pragma mark - ble Delegate
+
+- (void)bloodSugarBleReceiveState:(ELBluetoothState)state {
+    switch (state) {
+        case ELBluetoothStateUnavailable:
+        {
+            self.title = @"Please open the bluetooth";
+        }
+            break;
+        case ELBluetoothStateAvailable:
+        {
+            self.title = @"Bluetooth is open";
+        }
+            break;
+        case ELBluetoothStateScaning:
+        {
+            self.title = @"Scaning";
+        }
+            break;
+        case ELBluetoothStateConnectFail:
+        {
+            self.title = @"Connect fail";
+        }
+            break;
+        case ELBluetoothStateDidDisconnect:
+        {
+            self.title = @"Disconnected";
+            self.connectButton.hidden = NO;
+        }
+            break;
+        case ELBluetoothStateDidValidationPass:
+        {
+            self.connectButton.hidden = YES;
+            self.title = @"Connected";
+            //连接成功，获取单位
+            [[ELBloodSugarBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:ELInetGetCmdTypeReadDeviceSupportUnit];
+
+            //获取版本号
+            [[ELBloodSugarBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:ELInetGetCmdTypeGetBMVersion];
+            
+            //同步时间到设备
+            [[ELBloodSugarBleManager shareManager] syncMCUNowDate];
+            
+        
+            //查询设备状态
+            [[ELBloodSugarBleManager shareManager] bloodSugarQueryDeviceStatus];
+        }
+            break;
+        case ELBluetoothStateFailedValidation:
+        {
+            self.title = @"Illegal equipment";
+        }
+            break;
+        case ELBluetoothStateWillConnect:
+            self.title = @"Connecting";
+            break;
+        default:
+            break;
+    }
+}
+
+- (void)bloodSugarBleReceiveDevices:(NSArray<ELPeripheralModel *> *)devices {
+    for (ELPeripheralModel *model in devices) {
+        if ([model.macAddress isEqualToString:self.p.macAddress]) {
+            [[ELBloodSugarBleManager shareManager] connectPeripheral:model];
+        }
+    }
+}
+
+-(void)bloodSugarBleReceiveDeviceStatus:(BloodSugarDeviceStatus)status{
+    if (status == BloodSugarDeviceStatusNoStatus) {
+//        self.measureView.status = BloodSugarMeasureViewStatusDefault;
+    } else if (status == BloodSugarDeviceStatusTestWaiting) {
+        [self addLog:@"请插入试纸"];
+    } else if (status == BloodSugarDeviceStatusSamplingWaiting){
+        [self addLog:@"获取血样中..."];
+    } else if (status == BloodSugarDeviceStatusAnalysising){
+        [self addLog:@"血样分析中..."];
+    } else if (status == BloodSugarDeviceStatusTestComplete){
+        [self addLog:@"测量完成"];
+    }
+}
+
+- (void)bloodSugarBleReceiveTestData:(BloodSugarDataStruct)data {
+    NSString *unit = [NSString string];
+    if (data.unit == ELDeviceBloodSugarUnit_mmol_L) {
+        unit = @"mmol/L";
+    }else {
+        unit = @"mg/dl";
+    }
+    [self addLog:[NSString stringWithFormat:@"测量结果 数值 : %d, 单位 : %@ point : %d",data.value,unit,data.point]];
+}
+
+- (void)bloodSugarBleReceiveErrorCode:(BloodSugarErrorCode)errorCode {
+    NSString *errorMsg = @"测量失败";
+    switch (errorCode) {
+        case BloodSugarErrorCodeLowBattery:
+        {
+            errorMsg = @"电量不足";
+        }
+            break;
+        case BloodSugarErrorCodeUsedTestPaper: {
+            errorMsg = @"使用了已使用过的试纸";
+            break;
+        }
+        case BloodSugarErrorCodeTempHigh: {
+            errorMsg = @"环境温度超出使用范围";
+            break;
+        }
+        case BloodSugarErrorCodeCancelTest: {
+            errorMsg = @"试纸施加血样后测试未完成，被退出试纸";
+            break;
+        }
+        case BloodSugarErrorCodePassError: {
+            errorMsg = @"机器自检未通过";
+            break;
+        }
+        case BloodSugarErrorCodeLow: {
+            errorMsg = @"测量结果过低，超出测量范围";
+            break;
+        }
+        case BloodSugarErrorCodeHigh: {
+            errorMsg = @"测量结果过高，超出测量范围";
+            break;
+        }
+    }
+    
+    [self addLog:[NSString stringWithFormat:@"测量结果 :%@",errorMsg]];
+}
+
+- (void)bloodSugarBleBackManufactureData:(NSData *)data {
+    [self addLog:[NSString stringWithFormat:@"收到的原始数据 : %@",data]];
+}
+
+@end

AILinkBleSDKDemo/BloodSugar/BloodSugarScanViewController.h

+//
+//  BloodSugarScanViewController.h
+//  AILinkBleSDKSourceCode
+//
+//  Created by cliCk on 2021/1/28.
+//  Copyright © 2021 IOT. All rights reserved.
+//
+
+#import <UIKit/UIKit.h>
+
+NS_ASSUME_NONNULL_BEGIN
+
+@interface BloodSugarScanViewController : UIViewController
+
+@end
+
+NS_ASSUME_NONNULL_END

AILinkBleSDKDemo/BloodSugar/BloodSugarScanViewController.m

+//
+//  BloodSugarScanViewController.m
+//  AILinkBleSDKSourceCode
+//
+//  Created by cliCk on 2021/1/28.
+//  Copyright © 2021 IOT. All rights reserved.
+//
+
+#import "BloodSugarScanViewController.h"
+#import <AILinkBleSDK/ELBloodSugarBleManager.h>
+#import "Masonry.h"
+#import "BloodSugarConnectionViewController.h"
+
+@interface BloodSugarScanViewController () <UITableViewDelegate,UITableViewDataSource,BloodSugarBleDelegate>
+
+@property (nonatomic, strong) UITableView *tableView;
+
+@property (nonatomic, strong) NSArray<ELPeripheralModel *> *devices;
+
+@end
+
+@implementation BloodSugarScanViewController
+
+- (void)viewDidLoad {
+    [super viewDidLoad];
+    // Do any additional setup after loading the view.
+    
+    [self.view addSubview:self.tableView];
+    [self.tableView mas_makeConstraints:^(MASConstraintMaker *make) {
+        make.top.left.right.bottom.mas_equalTo(0);
+    }];
+}
+
+- (void)viewWillAppear:(BOOL)animated {
+    [[ELBloodSugarBleManager shareManager] startScan];
+    [ELBloodSugarBleManager shareManager].bloodSugarDelegate = self;
+}
+
+- (void)viewWillDisappear:(BOOL)animated {
+    [[ELBloodSugarBleManager shareManager] stopScan];
+}
+
+#pragma mark - BloodSugarBleDelegate
+
+- (void)bloodSugarBleReceiveState:(ELBluetoothState)state {
+    NSLog(@"bluetoothManagerUpdateBleState = %ld",state);
+}
+
+- (void)bloodSugarBleReceiveDevices:(NSArray<ELPeripheralModel *> *)devices {
+    self.devices = devices;
+    [self.tableView reloadData];
+}
+
+-(NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section{
+    return self.devices.count;
+}
+-(CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath{
+    return 60;
+}
+-(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{
+    static NSString *cellId = @"cellid";
+    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:cellId];
+    if (!cell) {
+        cell = [[UITableViewCell alloc] initWithStyle:(UITableViewCellStyleDefault) reuseIdentifier:cellId];
+    }
+    ELPeripheralModel *p = self.devices[indexPath.row];
+    cell.textLabel.text = [NSString stringWithFormat:@"Name:%@---Mac:%@\nCID:%ld---VID:%ld---PID:%ld",p.deviceName,p.macAddress,p.deviceType,p.vendorID,p.productID];
+    cell.textLabel.numberOfLines = 2;
+    cell.textLabel.textColor = [UIColor blackColor];
+    
+    return cell;
+
+}
+-(void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath{
+    ELPeripheralModel *p = self.devices[indexPath.row];
+    BloodSugarConnectionViewController *vc = [[BloodSugarConnectionViewController alloc] init];
+    vc.p = p;
+    [self.navigationController pushViewController:vc animated:YES];
+}
+-(UITableView *)tableView{
+    if (_tableView == nil) {
+        _tableView = [[UITableView alloc] init];
+        _tableView.delegate = self;
+        _tableView.dataSource = self;
+    }
+    return _tableView;
+}
+
+@end

AILinkBleSDKDemo/BodyFatScale/BodyFatScaleConnectViewController.m

 #import <AILinkBleSDK/ELBodyFatScaleBleManager.h>
 #import <AILinkBleSDK/ELBodyFatScaleBleUserModel.h>
 #import <AILinkBleSDK/ELBodyFatScaleBleWeightModel.h>
-#import "WiFiSetupViewController.h"
+//#import "WiFiSetupViewController.h"
 
 @interface BodyFatScaleConnectViewController ()<ELBluetoothManagerDelegate,ELBodyFatScaleBleDelegate,ElBleWifiDelegate>
 @property (nonatomic, strong) UITextView *textView;

AILinkBleSDKDemo/BodyFatScale/WiFiSetupViewController.m

-//
-//  WiFiSetupViewController.m
-//  AILinkBleSDKSourceCode
-//
-//  Created by iot_user on 2020/4/8.
-//  Copyright © 2020 IOT. All rights reserved.
-//
-
-#import "WiFiSetupViewController.h"
-
-@interface WiFiSetupViewController ()
-
-@end
-
-@implementation WiFiSetupViewController
-
-- (void)viewDidLoad {
-    [super viewDidLoad];
-    // Do any additional setup after loading the view.
-}
-
-/*
-#pragma mark - Navigation
-
-// In a storyboard-based application, you will often want to do a little preparation before navigation
-- (void)prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender {
-    // Get the new view controller using [segue destinationViewController].
-    // Pass the selected object to the new view controller.
-}
-*/
-
-@end

AILinkBleSDKDemo/Inherit/SubBleManager.m → AILinkBleSDKDemo/Others/Inherit/SubBleManager.m

 -(void)bluetoothReceiveBasicInfoPayloadData:(NSData *)data{
     //特殊数据：门锁和胎压监测会用到,需根据具体协议解析
 }
+
 ///Callback transparent transmission data(回调透传数据)
 /// @param data Transparent data(透传数据)
 -(void)bluetoothReceivePassData:(NSData *)data{

AILinkBleSDKDemo/ViewController.m → AILinkBleSDKDemo/Others/ViewController.m

 #import "BroadcastScaleViewController.h"
 #import "EightScaleScanViewController.h"
 #import "ToothbrushScanViewController.h"
+#import "ELBfsWifiScanVC.h"
 
 @interface ViewController ()<UITableViewDelegate,UITableViewDataSource>
 
                    @"Bluetooth BodyfatScale(体脂秤)",
                    @"Bluetooth BroadcastScale(广播秤)",
                    @"Eight-electrode scale(八电极体脂秤)",
-                   @"wifi-ble toothbrush(蓝牙WiFi牙刷)"
+                   @"wifi-ble toothbrush(WiFi-ble牙刷)",
+                   @"wifi-ble bodyfatScale(WiFi-ble体脂秤)",
     ];
     
     self.vcsArray = @[
         [[BodyFatScaleScanViewController alloc] init],
         [[BroadcastScaleViewController alloc] init],
         [[EightScaleScanViewController alloc] init],
-        [[ToothbrushScanViewController alloc] init]
+        [[ToothbrushScanViewController alloc] init],
+        [[ELBfsWifiScanVC alloc] init],
     ];
     
     [self.view addSubview:self.tableView];

AILinkBleSDKDemo/Oximeter/OximeterConnectionViewController.h

+//
+//  OximeterConnectionViewController.h
+//  AILinkBleSDKSourceCode
+//
+//  Created by cliCk on 2021/1/28.
+//  Copyright © 2021 IOT. All rights reserved.
+//
+
+#import <UIKit/UIKit.h>
+@class ELPeripheralModel;
+
+NS_ASSUME_NONNULL_BEGIN
+
+@interface OximeterConnectionViewController : UIViewController
+
+@property (nonatomic, strong) ELPeripheralModel *p;
+
+@end
+
+NS_ASSUME_NONNULL_END

AILinkBleSDKDemo/Oximeter/OximeterConnectionViewController.m

+//
+//  OximeterConnectionViewController.m
+//  AILinkBleSDKSourceCode
+//
+//  Created by cliCk on 2021/1/28.
+//  Copyright © 2021 IOT. All rights reserved.
+//
+
+#import "OximeterConnectionViewController.h"
+#import "Masonry.h"
+#import <AILinkBleSDK/ELOximeterBleManager.h>
+#import <AILinkBleSDK/ELOximeterDeviceModel.h>
+#import <AILinkBleSDK/ELOximeterBleModel.h>
+
+@interface OximeterConnectionViewController () <ELOximeterBleDelegate, ELBluetoothManagerDelegate>
+@property (nonatomic, strong) UITextView *textView;
+
+@property (nonatomic, copy) NSArray<NSNumber *> *units;
+@end
+
+@implementation OximeterConnectionViewController
+
+- (void)viewDidLoad {
+    [super viewDidLoad];
+    // Do any additional setup after loading the view.
+    
+    
+    self.view.backgroundColor = [UIColor whiteColor];
+    [ELOximeterBleManager shareManager].oximeterBleDelegate = self;
+    [ELOximeterBleManager shareManager].delegate = self;
+    [[ELOximeterBleManager shareManager] connectPeripheral:self.p];
+    
+    [self setupUIView];
+}
+
+- (void)viewWillDisappear:(BOOL)animated {
+    [[ELOximeterBleManager shareManager] disconnectPeripheral];
+}
+
+-(void)addLog:(NSString *)log{
+    self.textView.text = [NSString stringWithFormat:@"%@\n\n%@",log,self.textView.text];
+}
+
+- (void)setupUIView {
+    self.textView = [[UITextView alloc] init];
+    self.textView.backgroundColor = [UIColor blackColor];
+    self.textView.text = @"Log";
+    self.textView.textColor = [UIColor redColor];
+    [self.view addSubview:self.textView];
+    [self.textView mas_makeConstraints:^(MASConstraintMaker *make) {
+        make.left.mas_equalTo(10);
+        make.right.mas_equalTo(-10);
+        make.bottom.offset(-44);
+        make.top.offset(150);
+    }];
+}
+
+#pragma mark - ble Delegate
+
+- (void)oximeterManagerBleState:(ELBluetoothState)state {
+    switch (state) {
+        case ELBluetoothStateUnavailable:
+        {
+            self.title = @"Please open the bluetooth";
+        }
+            break;
+        case ELBluetoothStateAvailable:
+        {
+            self.title = @"Bluetooth is open";
+        }
+            break;
+        case ELBluetoothStateScaning:
+        {
+            self.title = @"Scaning";
+        }
+            break;
+        case ELBluetoothStateConnectFail:
+        {
+            self.title = @"Connect fail";
+        }
+            break;
+        case ELBluetoothStateDidDisconnect:
+        {
+            self.title = @"Disconnected";
+        }
+            break;
+        case ELBluetoothStateDidValidationPass:
+        {
+            self.title = @"Connected";
+            //获取设备设置信息
+            [[ELOximeterBleManager shareManager] sendToBleWithGetDeviceStaus];
+        }
+            break;
+        case ELBluetoothStateFailedValidation:
+        {
+            self.title = @"Illegal equipment";
+        }
+            break;
+        case ELBluetoothStateWillConnect:
+            self.title = @"Connecting";
+            break;
+        default:
+            break;
+    }
+}
+
+- (void)oximeterManagerSetupState:(ELOximeterBleModel *)bleModel markType:(enum OximeterTestMarkType)markType {
+    
+    NSString *logString = [NSString stringWithFormat:@"SpO2 : %zd \n bpm : %zd \n PI : %.1f \n power : %zd",bleModel.SpO2,bleModel.pulseRate,bleModel.pi/10.f,bleModel.power];
+    
+    [self addLog:logString];
+}
+
+- (void)oximeterManagerBleBackManufactureData:(NSData *)data {
+    [self addLog:[NSString stringWithFormat:@"收到的原始数据 : %@",data]];
+}
+
+@end

AILinkBleSDKDemo/Oximeter/OximeterScanViewController.h

+//
+//  OximeterScanViewController.h
+//  AILinkBleSDKSourceCode
+//
+//  Created by cliCk on 2021/1/28.
+//  Copyright © 2021 IOT. All rights reserved.
+//
+
+#import <UIKit/UIKit.h>
+
+NS_ASSUME_NONNULL_BEGIN
+
+@interface OximeterScanViewController : UIViewController
+
+@end
+
+NS_ASSUME_NONNULL_END

AILinkBleSDKDemo/Oximeter/OximeterScanViewController.m

+//
+//  OximeterScanViewController.m
+//  AILinkBleSDKSourceCode
+//
+//  Created by cliCk on 2021/1/28.
+//  Copyright © 2021 IOT. All rights reserved.
+//
+
+#import "OximeterScanViewController.h"
+#import <AILinkBleSDK/ELOximeterBleManager.h>
+#import "Masonry.h"
+#import "OximeterConnectionViewController.h"
+
+@interface OximeterScanViewController () <UITableViewDelegate,UITableViewDataSource,ELOximeterBleDelegate>
+ 
+@property (nonatomic, strong) UITableView *tableView;
+
+@property (nonatomic, strong) NSArray<ELPeripheralModel *> *devices;
+
+@end
+
+@implementation OximeterScanViewController
+
+- (void)viewDidLoad {
+    [super viewDidLoad];
+    // Do any additional setup after loading the view.
+    
+    [self.view addSubview:self.tableView];
+    [self.tableView mas_makeConstraints:^(MASConstraintMaker *make) {
+        make.top.left.right.bottom.mas_equalTo(0);
+    }];
+}
+
+- (void)viewWillAppear:(BOOL)animated {
+    [[ELOximeterBleManager shareManager] startScan];
+    [ELOximeterBleManager shareManager].oximeterBleDelegate = self;
+}
+
+- (void)viewWillDisappear:(BOOL)animated {
+    [[ELOximeterBleManager shareManager] stopScan];
+}
+
+#pragma mark - ELOximeterBleDelegate
+
+- (void)oximeterManagerBleState:(ELBluetoothState)state {
+    NSLog(@"bluetoothManagerUpdateBleState = %ld",state);
+}
+
+- (void)oximeterManagerScanDevices:(NSArray<ELOximeterDeviceModel *> *)devices {
+    self.devices = devices;
+    [self.tableView reloadData];
+}
+
+-(NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section{
+    return self.devices.count;
+}
+-(CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath{
+    return 60;
+}
+-(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{
+    static NSString *cellId = @"cellid";
+    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:cellId];
+    if (!cell) {
+        cell = [[UITableViewCell alloc] initWithStyle:(UITableViewCellStyleDefault) reuseIdentifier:cellId];
+    }
+    ELPeripheralModel *p = self.devices[indexPath.row];
+    cell.textLabel.text = [NSString stringWithFormat:@"Name:%@---Mac:%@\nCID:%ld---VID:%ld---PID:%ld",p.deviceName,p.macAddress,p.deviceType,p.vendorID,p.productID];
+    cell.textLabel.numberOfLines = 2;
+    cell.textLabel.textColor = [UIColor blackColor];
+    
+    return cell;
+
+}
+-(void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath{
+    ELPeripheralModel *p = self.devices[indexPath.row];
+    OximeterConnectionViewController *vc = [[OximeterConnectionViewController alloc] init];
+    vc.p = p;
+    [self.navigationController pushViewController:vc animated:YES];
+}
+-(UITableView *)tableView{
+    if (_tableView == nil) {
+        _tableView = [[UITableView alloc] init];
+        _tableView.delegate = self;
+        _tableView.dataSource = self;
+    }
+    return _tableView;
+}
+
+@end