iOS AILinkBleSDK - 蓝牙SDK

AILinkBleSDK使用说明

更新说明

版本号	更新时间	作者	更新信息
v1.0.2_20200407	2020-04-09	JosonXiong	初始化
v1.0.3_20200421	2020-04-21	JosonXiong	1.修改多次开关蓝牙和连接断开后state状态无法同步的问题;2增加父类“ELBluetoothManager”数据透传方法，请在子类中调用

使用条件

1.iOS 9.0及以上版本； 2.蓝牙4.0及以上版本。

使用前准备

1.在info.plist文件中加入“Privacy - Bluetooth Always Usage Description”； 2.下载AILinkBleSDK并解压；下载地址： 3.将AILinkBleSDK.framework文件导入项目;

开始使用

一、公共部分

SDK的ELBluetoothManager是SDK的父类，它分为以下几个公共部分：

1.公共属性

@property (nonatomic, assign, readonly) BOOL isOn;
//Bluetooth status（蓝牙状态）
@property (nonatomic, assign, readonly) ELBluetoothState state;
//version number（版本号）
@property (nonatomic, copy, readonly) NSString *bmVersion;
/**
 Save the model corresponding to the currently connected device
 保存当前连接的设备对应的模型
 */
@property (nonatomic, strong, readonly) ELPeripheralModel *peripheralModel;
//Bluetooth proxy(蓝牙代理)
@property (nonatomic, weak) id<ELBluetoothManagerDelegate> delegate;
//Bluetooth wifi proxy(蓝牙wifi代理)
@property (nonatomic, weak) id<ElBleWifiDelegate> bleWifiDelegate;

2.公共方法

//
+(__kindof ELBluetoothManager * _Nonnull)shareManager;
/**
 Get the SDK version number
 获取SDK版本号
 */
-(NSString *)sdkVersion;

//Start scanning（开始扫描）
-(void)startScan;
//Stop scanning（停止扫描）
-(void)stopScan;
//Connecting device（连接设备）
-(void)connectPeripheral:(ELPeripheralModel *)peripheralModel;
//Disconnect device（断开设备）
-(void)disconnectPeripheral;

#pragma mark ============ 发送指令的3种方法 ==============
/**
 Shortcut method to send A6 data to BLE(发送A6数据给BLE的快捷方法)
 @param data The stitched payload part(拼接好的payload部分)
 */
-(void)sendCmdToMCUWithA6PayloadData:(NSData *)data;
/**
 Shortcut method of sending A7 data to MCU(发送A7数据给MCU的快捷方法)
 @param data The stitched payload part(拼接好的payload部分)
 @param type Equipment type(设备类型)
 */
-(void)sendCmdToMCUWithA7PayloadData:(NSData *)data deviceType:(ELSupportDeviceType)type;

/**
 General method of sending data (support data transparent transmission)(发送数据通用方法（支持数据透传）)

 @param data 数据
 */
-(void)sendData:(NSData *)data;

#pragma mark ============ Please rewrite the following methods in the subclass(请在子类重写以下方法) BEGIN==============

-(void)bluetoothUpdateState:(ELBluetoothState)state;

-(void)bluetoothScanPeripherals:(NSArray *)peripherals;


/**
Callback decrypted A7 transparent data (payload part), type device type( 回调解密后的A7透传数据(payload部分),type设备类型)
 */
-(void)bluetoothReceiveData:(NSData *)playload deviceType:(ELSupportDeviceType)type;

/**
 The special A6 data will only be received by the supported devices, and the complete A6 data (A6 is not encrypted) is passed to the subclass resolution.
 特殊的A6数据，只有支持的设备才会收到，将完整A6数据(A6不加密)传给子类解析
 ELSupportDeviceType support：
 ELSupportDeviceTypeBodyFatScale
 ELSupportDeviceTypeSmartLock
 */
-(void)bluetoothBackA6Data:(NSData *)data withClassId:(ELSupportDeviceType)type;

/**
 Callback to scan special devices that can be bound, such as door locks（回调扫描到的可以绑定的特殊设备，如门锁）
 */
-(void)bluetoothScanCanBindSpecialPeripherals:(NSArray *)peripherals;

/**
 Callback device basic information（回调设备基本信息）

 @param data Device basic information payload data (length is 16 bytes)（设备基本信息payload数据（长度为16个byte））
 */
-(void)bluetoothReceiveBasicInfoPayloadData:(NSData *)data;

#pragma mark ============ Please rewrite the following methods in the subclass(子类重写方法) END==============



#pragma mark ============ A6 Set or query instructions(设置或查询指令)  ==============

/**
 Get Bluetooth information(获取蓝牙信息)

 @param type ELInetGetCmdType （ELInetGetCmdTypeGetHandshake除外）
 */
-(void)getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdType)type;

/**
 Set the Bluetooth name(设置蓝牙名称)

 @param name Name, less than 14 bytes(名称,小于14个byte)
 */
-(void)setBluetoothName:(NSString * _Nonnull)name;

/**
 Set the broadcast interval(设置广播间隔时间)

 @param interval 20~2000
 */
-(void)setBroadcastInterval:(int)interval;


/**
 Set the connection interval 10(设置连接间隔)

 @param interval The interval range is 20~2000ms.(interval范围是20~2000ms)
 @param timeout  The timeout range is 1000~6000ms(timeout范围是1000~6000ms)
 @param latency  The latency range is 0~4(latency范围是0〜4)
 */
-(void)setConnectedInterval:(int)interval timeout:(int)timeout Latency:(int)latency;

/**
 Set the transmit power(设置发射功率)

 @param power The range of power is 0~10(power的范围是0~10)
 */
-(void)setTransmittingPower:(int)power;

/**
 Set the serial port baud rate(设置串口波特率)

 @param rate The range of rate is 0~5(rate的范围是0~5)
 0：9600
 1：19200
 2：38400
 3：57600
 4：115200
 5：921600
 */
-(void)setSerialPortbaudRate:(int)rate;

/**
 Set the MCU software and hardware version number(设置MCU软硬件版本号)

 @param hardware 硬件
 @param software 软件
 如果是:S1.1,S11.1,S111.1, .....
 请传：11,111,1111, ....
 @param type Manufacturer's own definition(厂家自己定义)
 @param year 年
 @param month 月
 @param day 日
 */
-(void)setMCUVersion:(unsigned int)hardware software:(unsigned int)software mcuType:(unsigned int)type year:(unsigned int)year month:(unsigned int)month day:(unsigned int)day;

/**
 Set the big endian or little endian of the Mac address in the broadcast manufacturer's custom data.(设置广播厂家自定义数据中Mac地址的大端序或小端序)

 @param type type
 0：Little endian (default)(小端序 （默认）)
 1：Big endian(大端序)
 */
-(void)setSetMACAddressType:(int)type;

/**
 Set up the module's service and feature services(设置模块的服务和特征服务)

 @param serverUUIDData server
 @param charateristicUUIDData charateristic
 @param type UUID length：
 0 : 16 bytes（default）
 1：2 bytes
 */
-(void)setBluetoothServerUUID:(NSData *)serverUUIDData charateristicUUID:(NSData *)charateristicUUIDData UUIDType:(int)type;

/**
 Set the master-slave mode of the module(设置模块的主从模式)

 @param type Value：
 0：Slave mode (default)(从机模式（默认）)
 1：Host mode(主机模式)
 */
-(void)setMCUModel:(int)type;

/**
 Set the module's automatic sleep time without connection(设置模块无连接的自动休眠时间)

 @param open Automatic sleep flag(自动睡眠标志位)：
 0：Do not turn on automatic sleep(不开启自动休眠)
 1：Turn on auto sleep, the module is not connected(开启自动休眠，模块没有连接)
 @param time Automatic sleep time (ms)(自动睡眠时间(ms))
 @param radio Whether to enable low frequency broadcast after sleep: (unit: ms)(睡眠后是否开启低频广播：（单位：ms）)
 0：Not open(不开启)
 1：Open(开启)
 @param interval 低频广播间隔时间,20~2000ms
 */
-(void)setAutoSleepTimeIsOpen:(BOOL)open autoSleepTime:(unsigned int)time isRadio:(BOOL)radio radioInterval:(int)interval;

/**
 Set to sleep(设置进入睡眠)

 @param radio Whether to enable low frequency broadcast after sleep: (in ms)(睡眠后是否开启低频广播：（单位 ms）)
 0：Not open(不开启)
 1：Open(开启)
 @param interval 低频广播间隔时间,20~2000ms
 */
-(void)setGotoSleepIsRadio:(BOOL)radio interval:(int)interval;

/**
 Set module wake up(设置模块唤醒)
 */
-(void)setMCUWakeUp;

/**
 Set the current time of the system(设置系统当前时间)
 @param enable
 NO: In addition to the ability to turn off the time function, you can save part of the current (default)(除能，关闭时间功能，可省部分电流（默认）)
 YES:Enable, turn on the timer function timer(使能，开启计时功能定时器)
 */
-(void)setMCUNowDateWithEnable:(BOOL)enable;

/**
 Setting CID, VID, PID（设置CID、VID、PID）

 @param setC Whether to set the CID(是否设置CID)
 @param setV Whether to set the VID(是否设置VID)
 @param setP Whether to set the PID(是否设置PID)
 @param cid Product Type ID: Less than 65536(产品类型ID：小于65536)
 @param vid Manufacturer ID: less than 65536(厂家ID：小于65536)
 @param pid Product ID: Less than 65536(产品ID：小于65536)
 */
-(void)setC_V_P_IDWithIsSetCID:(BOOL)setC isSetVID:(BOOL)setV isSetPID:(BOOL)setP CID:(unsigned int)cid VID:(unsigned int)vid PID:(unsigned int)pid;

/**
 Set module communication mode
 设置模块通信模式

 @param mode communication mode（通信模式）
 */
-(void)setCommunicationMode:(ELCommunicationModeType)mode;

/**
 Set module restart
 设置模块重启
 */
-(void)setMCURestart;

/**
 Set factory reset
 设置恢复出厂设置
 */
-(void)setFactoryDataReset;

/**
 Set the Bluetooth connection status（设置蓝牙连接状态）

 @param disconnect Active disconnect flag（主动断开连接标志位）
 1：Disconnect immediately（立刻断开连接）
 0：Not disconnected（不断开连接）
 */
-(void)setDisconnected:(BOOL)disconnect;

/**
 Send decoding key（发送解码密钥）

 @param data The length of the decoding key is 19, the first 16 are keys, and the last 3 are random texts. You need to save this value on the app and MCU to generate a one-time password. （解码密钥的长度为19,前16个为密钥，后3个为随机文,需要在app端和MCU端保存这个值，用于生成一次性密码）
 */
- (void)setKeyWithData:(NSData *)data;



#pragma mark ============ Bluetooth WIFI calling method(蓝牙WIFI调用方法) ==============

/**
 WIFI initiate connection and disconnect(WIFI 发起连接、断开连接)

 @param connect YES: initiate connection NO: disconnect(YES:发起连接 NO:断开连接)
 */
-(void)bleWifiSetupWifiConnect:(BOOL)connect;

/**
 Set WIFI access URL(设置WIFI访问URL)
 
 @param url url（Not more than 56chars(不超过56chars)）
 */
-(void)bleWifiSetWifiURL:(NSString *)url;

/**
 Set Wifi access port number(设置Wifi访问端口号)
 
 @param port 端口号
 */
-(void)bleWifiSetPort:(int)port;

/**
 Set DTIM interval(设置DTIM间隔)

 @param interval 间隔
 */
-(void)bleWifiSetDTIMInterval:(int)interval;

/**
 Set WIFI password(设置WIFI密码)
 
 @param pwd WIFI password (8 ~ 56 chars)(WIFI密码(8~56 个chars))
 */
-(void)bleWifiSetWifiPwd:(NSString *)pwd;

/**
 Set up connected WIFI(设置连接的WIFI)

 @param macData wifi MAC (little endian)(wifi的MAC（小端序）)
 */
-(void)bleWifiSetConnectWifiMac:(NSData *)macData;

3.公共协议

//MARK:蓝牙通用协议
@protocol ELBluetoothManagerDelegate <NSObject>
@optional

//Callback Bluetooth status（回调蓝牙状态）
-(void)bluetoothManagerUpdateBleState:(ELBluetoothState)state;
//Callback to scanned device（回调扫描到的设备）
-(void)bluetoothManagerScanedPeripherals:(NSArray<ELPeripheralModel *> *_Nonnull)peripherals;
//Special devices that can be bound in the callback, such as door locks（回调中扫描到的可以绑定的特殊设备，如门锁）
-(void)bluetoothManagerScanedCanBindSpecialPeripherals:(NSArray<ELPeripheralModel *> *_Nonnull)peripherals;
//Callback decrypted transparent data (A7 decrypted payload data)（回调解密后的数据(A7解密后payload数据)）
-(void)bluetoothManagerReceiveData:(NSData *_Nonnull)data deviceType:(ELSupportDeviceType)type;

/**
 回调透传数据

 @param data 透传数据(此数据不能以A6或A7开头)
 */
-(void)bluetoothManagerReceivePassData:(NSData *_Nullable)data;


#pragma mark ============ A6 Set or query the callback of the instruction execution result（设置或查询指令执行结果的回调） ==============
/**
 Set or query the callback of the instruction execution result（设置指令蓝牙响应回调方法(握手指令除外)）

 @param type Type of setting （设置的类型）
 @param result Set result（设置的结果）
 */
-(void)bluetoothManagerReceiceResponseType:(ELInetSetCmdType)type result:(ELSetBluetoothResponseType)result;

/**
 Query module status callback（查询模块状态的回调）

 @param stateStrct 结构体
 */
-(void)bluetoothManagerReceiveMCUConnectedState:(struct ELMCUStateStruct)stateStrct;

/**
 Query the callback of the communication mode（查询通信模式的回调）

 @param type communication mode（通信模式）
 */
-(void)bluetoothManagerReceiveCommunicationMode:(ELCommunicationModeType)type;

/**
 Query the callback of automatic sleep time（查询自动睡眠时间的回调）

 @param sleetStrct Automatic sleep time(自动睡眠时间)
 */
-(void)bluetoothManagerReceiveAutoSleepTime:(struct ELAutoSleepTimeStruct)sleetStrct;

/**
 Query master-slave mode callback（查询主从模式回调）

 @param mode 模式
 0:Slave mode（从机模式）
 1:Host mode（主机模式）
 */
-(void)bluetoothManagerReceiveMCUMode:(int)mode;

/**
 Query the callback of UUID information（查询UUID信息的回调）

 @param uuid ELUUIDStruct
 */
-(void)bluetoothManagerReceiveUUID:(struct ELUUIDStruct)uuid;

/**
 Query the callback of the MAC address size endian（查询MAC地址大小端序的回调）

 @param type 类型
 0:Little endian（小端序）
 1:Big endian （大端序）
 */
-(void)bluetoothManagerReceiveMacAddressType:(int)type;

/**
 Query the callback of the Bluetooth serial port baud rate（查询蓝牙串口波特率的回调）

 @param rate Serial port baud rate（串口波特率）
 0:9600
 1:19200
 2:38400
 3:57600
 4:115200
 5:921600
 */
-(void)bluetoothManagerReceiveSerialPostBaudRate:(int)rate;

/**
 Query the callback of Bluetooth transmit power（查询蓝牙发射功率的回调）

 @param dbm Transmit power（发射功率）
 */
-(void)bluetoothManagerReceiveTransmittingPower:(int)dbm;

/**
 Query the callback of the Bluetooth connection interval（查询蓝牙连接间隔的回调）

 @param intervalStrct connection interval
 */
-(void)bluetoothManagerReceiveConnectInterval:(struct ELConnectIntervalStruct)intervalStrct;

/**
 Query the callback of the Bluetooth name（查询蓝牙名称的回调）

 @param name Bluetooth name（蓝牙名称）
 */
-(void)bluetoothManagerReceiceName:(NSString *_Nullable)name;

/**
 Query the callback of the Bluetooth broadcast interval（查询蓝牙广播间隔的回调）

 @param interval broadcast interval（广播间隔）
 */
-(void)bluetoothManagerReceiveBroadcastInterval:(int)interval;

/**
 Query the callback of the Bluetooth MAC address（查询蓝牙MAC地址的回调）

 @param macAddress MAC
 */
-(void)bluetoothManagerReceiveMACAddress:(NSString *_Nonnull)macAddress;

/**
 Query the callback of the software and hardware version number of the BM module（查询BM模块软硬件版本号的回调）

 @param bmVersion BM module software and hardware version number（BM模块软硬件版本号）
 */
-(void)bluetoothManagerReceiveBMVersion:(NSString *_Nonnull)bmVersion;

/**
 Query the callback of the MCU software and hardware version number（查询MCU软硬件版本号的回调）
 
 @param mcuVersion Callback of MCU software and hardware version number（MCU软硬件版本号的回调）
 */
-(void)bluetoothManagerReceiveMCUVersion:(NSString *_Nonnull)mcuVersion;

/**
 Query the callback of Bluetooth time（查询蓝牙时间的回调）

 @param date yyyy-MM-dd HH:mm:ss
 @param effective Time is invalid（时间有无效）
 0：effective（系统时间无效）
 1：invalid（系统时间有效）
 */
-(void)bluetoothManagerReceiveBluetoothDate:(NSString * _Nonnull)date effective:(BOOL)effective;

/**
 Query CID, VID, PID callback（查询CID,VID,PID的回调）

 @param did CID,VID,PID
 */
-(void)bluetoothManagerReceiveDID:(struct ELDIDStruct)did;

/**
 Query the callback of the battery status（查询电池状态的回调）

 @param battery Structure of battery charge status and charge percentage（电池充电状态和电量百分比的结构体）
 */
-(void)bluetoothManagerReceiveBattery:(struct ELBatteryStruct)battery;

/**
 * Query the callback of the device support unit（查询设备支持单位的回调）
 
 */
- (void)bluetoothManagerBackDeviceSupportUnitWithWeight:(NSArray<NSNumber *> *_Nullable)weightArray
                                                 Height:(NSArray<NSNumber *> *_Nullable)heightArray
                                            Temperature:(NSArray<NSNumber *> *_Nullable)temperatureArray
                                          BloodPressure:(NSArray<NSNumber *> *_Nullable)bloodPressureArray
                                               Pressure:(NSArray<NSNumber *> *_Nullable)pressureArray;


/**
 Set the result of the decoding key（设置解码密钥的结果）

 @param result 结果
 */
-(void)bluetoothManagerReceiveSetKeyResult:(BOOL)result;

4.WiFi协议
//MARK:Bluetooth Wifi protocol(蓝牙Wifi协议)
@protocol ElBleWifiDelegate <NSObject>

@optional

/**
 Callback Wifi details(回调Wifi详情)

 @param model 模型
 */
-(void)bleWifiReceiveWifiDetailModel:(ELBleWifiDetailModel *_Nonnull)model;

/**
Scan nearby wifi results(扫描附近wifi结果)

 @param count Number of nearby wifi(附近wifi数量)
 */
-(void)bleWifiReceiveScanedWifiCount:(int)count;

/**
 Callback Wifi MAC address(回调Wifi MAC地址)

 @param macData mac
 */
-(void)bleWifiReceiveWifiMacData:(NSData *_Nullable)macData;

/**
Callback WIFI password(回调WIFI密码)

 @param pwd password(密码)
 */
-(void)bleWifiReceiveWifiPwd:(NSString *_Nonnull)pwd;

/**
 Get DTIM interval (unit: ms)(获取DTIM间隔(单位:ms))

 @param interval Interval (unit: ms)(间隔(单位:ms))
 */
-(void)bleWifiReceiveWifiDTIMInterval:(NSInteger)interval;

/**
 Returns the visited URL(返回访问的url)

 @param url url
 */
-(void)bleWifiReceiveWifiAccessURL:(NSString *_Nonnull)url;

/**
  Call back wifi port number(回调wifi的端口号)

 @param port 端口号
 */
-(void)bleWifiReceiveWifiPort:(int)port;

/**
 Set or query the callback of the instruction execution result（设置指令蓝牙WIFI响应回调方法）
 只支持蓝牙Wifi部分枚举
 @param type Type of setting （设置的类型）
 @param result Set result（设置的结果）
 */
-(void)bleWifiReceiceResponseType:(ELInetSetCmdType)type result:(ELSetBluetoothResponseType)result;

/**
 获取会话码

 @param code 会话码(为0时表示不存在)
 */
-(void)bleWifiReceiveWifiSNCode:(int)code;

5.说明

内容很多，需要调用什么自己按需要调用，如果是接入指定的设备，可查看四～十一。

二、自己定义协议走透传

1.导入父类或子类的头文件

（1）以体脂秤为例，导入头文件#import （2）设置代理：

[ELBodyFatScaleBleManager shareManager].bodyFatScaleDelegate = self;
[ELBodyFatScaleBleManager shareManager].delegate  =self;

2.连接设备

（1）扫描到设备

 [[ELBodyFatScaleBleManager shareManager] startScan];

（2）选择设备并发起连接

-(void)bodyFatScaleManagerScanDevices:(NSArray<ELBodyFatScaleDeviceModel *> *)scaleDevices{
    [[ELBodyFatScaleBleManager shareManager] connectPeripheral:device];
}

3.发送透传数据

  [[ELBodyFatScaleBleManager shareManager] sendData:data];

4.接收透传数据

//MARK:接收透传数据（不符合AILink协议的数据，需要做透传的客户可在此根据自己的协议解析数据,透传数据不可以”A6”或”A7”开头）

-(void)bluetoothManagerReceivePassData:(NSData *)data{
    NSLog(@"bluetoothManagerReceivePassData = %@",data.description);
    
}

5.说明

所有设备都支持透传，可使用AILink协议的同时，自定义协议走透传实现一些额外的功能。

三、有AILink协议自己解析数据

1.继承

@interface SubBleManager : ELBluetoothManager

2.设置单例

+(instancetype)shareManager;

3.实现父类的方法

-(void)bluetoothUpdateState:(ELBluetoothState)state;

-(void)bluetoothScanPeripherals:(NSArray *)peripherals;

/**
Callback decrypted A7 transparent data (payload part), type device type( 回调解密后的A7透传数据(payload部分),type设备类型)
 */
-(void)bluetoothReceiveData:(NSData *)playload deviceType:(ELSupportDeviceType)type;

/**
 The special A6 data will only be received by the supported devices, and the complete A6 data (A6 is not encrypted) is passed to the subclass resolution.
 特殊的A6数据，只有支持的设备才会收到，将完整A6数据(A6不加密)传给子类解析
 ELSupportDeviceType support：
 ELSupportDeviceTypeBodyFatScale
 ELSupportDeviceTypeSmartLock
 */
-(void)bluetoothBackA6Data:(NSData *)data withClassId:(ELSupportDeviceType)type;

/**
 Callback to scan special devices that can be bound, such as door locks（回调扫描到的可以绑定的特殊设备，如门锁）
 */
-(void)bluetoothScanCanBindSpecialPeripherals:(NSArray *)peripherals;

/**
 Callback device basic information（回调设备基本信息）

 @param data Device basic information payload data (length is 16 bytes)（设备基本信息payload数据（长度为16个byte））
 */
-(void)bluetoothReceiveBasicInfoPayloadData:(NSData *)data;

///Callback transparent transmission data(回调透传数据)
/// @param data Transparent data(透传数据)
-(void)bluetoothReceivePassData:(NSData *)data{
    //Parsing transparent transmission data(解析透传数据)
}

4.定义自己的协议

@protocol SubBleManagerDelegate <NSObject>

5.实现自定义方法

/// 发送数据给mcu
/// @param data 协议对应数据
-(void)subBleSendA6Data:(NSData *)data;

/// 发送数据给蓝牙
/// @param payload 协议的payload部分数据
-(void)subBleSendA7Data:(NSData *)payload;

6.调用

遵守协议--》设置代理--》连接设备--》发送和接收数据

7.说明

自己的协议名称不能与父类中的协议同名，具体的实现请参考Demo

四、集成婴儿秤

1.导入头文件并遵守协议

#import <AILinkBleSDK/ELBabyScaleBleManager.h>
@interface BabyScaleConnectViewController ()<ELBluetoothManagerDelegate,BabyScaleBleDelegate>

2.设置代理

[ELBabyScaleBleManager shareManager].babyScaleDelegate = self;
    [ELBabyScaleBleManager shareManager].delegate  =self;

3.扫描并连接设备

[[ELBabyScaleBleManager shareManager] startScan];
-(void)babyScaleManagerScanDevices:(NSArray<ELBabyScaleDeviceModel *> *)babyScaleDevices{
    [[ELBabyScaleBleManager shareManager] connectPeripheral:device]

}

4.发送数据

（1）获取BM版本号

[[ELBabyScaleBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeGetBMVersion)];

（2）设置蓝牙名称

[[ELBabyScaleBleManager shareManager] setBluetoothName:@"AILink"];

（3）发送Hold

[[ELBabyScaleBleManager shareManager] changeHold:YES];

（4）发送去皮

[[ELBabyScaleBleManager shareManager] changeHold:NO];

（5）修改单位

[[ELBabyScaleBleManager shareManager] changeHeightUnit:(ELDeviceHeightUnit_CM) AndWeightUnit:(ELDeviceWeightUnit_KG)];

5.接收数据

-(void)bluetoothManagerReceiceResponseType:(ELInetSetCmdType)type result:(ELSetBluetoothResponseType)result{
    if (type == ELInetSetCmdTypeSetName) {
        if (result == ELSetBluetoothResponseTypeSuccess) {
            [self addLog:@"Set name Success "];
        }else if (result == ELSetBluetoothResponseTypeFailure){
            [self addLog:@"Set name failure "];
        }else if (result == ELSetBluetoothResponseTypeNoSupport){
            [self addLog:@"Set name unsupport "];
        }

    }

}

//MARK:获取设备支持的单位
-(void)bluetoothManagerBackDeviceSupportUnitWithWeight:(NSArray<NSNumber *> *)weightArray Height:(NSArray<NSNumber *> *)heightArray Temperature:(NSArray<NSNumber *> *)temperatureArray BloodPressure:(NSArray<NSNumber *> *)bloodPressureArray Pressure:(NSArray<NSNumber *> *)pressureArray{
    //这里体重和身高单位
    //设置单位时，要设置设备支持的单位
    
}

-(void)bluetoothManagerReceiveBMVersion:(NSString *)bmVersion{
    [self addLog:bmVersion];
}

//错误
-(void)babyScaleBackDeviceErrorCode:(BabyScaleDeviceErrorCode)code{
    [self addLog:[NSString stringWithFormat:@"error code = %ld",code]];
}
//体重
-(void)babyScaleManagerReceiveWeightModel:(ELBabyScaleBleWeightModel *)model{
    [self addLog:[NSString stringWithFormat:@"weight = %ld unit=%@ point = %ld",model.weight,model.unitStr,model.weightPoint]];
}
//身长数据
-(void)babyScaleManagerHeightModel:(ELBabyScaleBleHeightModel *)model{
    [self addLog:[NSString stringWithFormat:@"height = %ld unit=%@ point = %ld",model.height,model.unitStr,model.heightPoint]];
}
-(void)babyScaleBackCtrlType:(NSInteger)type Results:(BabyScaleResultType)result{
//    0去皮，1锁定）
    if (type == 0) {
        if (result == BabyScaleResultType_Succeed) {
            [self addLog:@"Zero Unit success"];
        }else if (result == BabyScaleResultType_Failure){
            [self addLog:@"Zero Unit failure"];
        }else if (result == BabyScaleResultType_Unsupported){
            [self addLog:@"Zero Unit unsupported"];
        }
    }else{
        if (result == BabyScaleResultType_Succeed) {
            [self addLog:@"Hold Unit success"];
        }else if (result == BabyScaleResultType_Failure){
            [self addLog:@"Hold Unit failure"];
        }else if (result == BabyScaleResultType_Unsupported){
            [self addLog:@"Hold Unit unsupported"];
        }
    }

}
-(void)babyScaleBackSetUnitResults:(BabyScaleResultType)result{
    if (result == BabyScaleResultType_Succeed) {
        [self addLog:@"Change Unit success"];
    }else if (result == BabyScaleResultType_Failure){
        [self addLog:@"Change Unit failure"];
    }else if (result == BabyScaleResultType_Unsupported){
        [self addLog:@"Change Unit unsupported"];
    }

}

-(void)babyScaleManagerUpdateState:(ELBluetoothState)state{
    switch (state) {
        case ELBluetoothStateUnavailable:
        {
            self.title = @"Please open the bluetooth";
        }
            break;
        case ELBluetoothStateAvailable:
        {
            self.title = @"Bluetooth is open";
        }
            break;
        case ELBluetoothStateScaning:
        {
            self.title = @"Scaning";
        }
            break;
        case ELBluetoothStateConnectFail:
        {
            self.title = @"Connect fail";
        }
            break;
        case ELBluetoothStateDidDisconnect:
        {
            self.title = @"Disconnected";
        }
            break;
        case ELBluetoothStateDidValidationPass:
        {
            self.title = @"Connected";
            [[ELBabyScaleBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeReadDeviceSupportUnit)];
        }
            break;
        case ELBluetoothStateFailedValidation:
        {
            self.title = @"Illegal equipment";
        }
            break;
            case ELBluetoothStateWillConnect:
            self.title = @"Connecting";
            break;
        default:
            break;
    }
}

6.说明

婴儿秤需要从设备读取支持的身高单位和体重单位，单位切换时要以支持的单位为准

五、集成血压计

1.导入头文件并遵守协议

#import <AILinkBleSDK/ELBloodBleManager.h>
@interface BloodConnectViewController ()<ELBluetoothManagerDelegate,ELBloodBleManagerDelegate>

2.设置代理

[ELBloodBleManager shareManager].bloodDelegate = self; 
    [ELBloodBleManager shareManager].delegate  =self;

3.扫描并连接设备

[[ELBloodBleManager shareManager] startScan];
-(void)bloodBleManagerScanDevices:(NSArray<ELPeripheralModel *> *)devices{
    [[ELBloodBleManager shareManager] connectPeripheral:device];

}

4.发送数据

(1)获取BM版本号

[[ELBloodBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeGetBMVersion)];

(2)设置蓝牙名称

[[ELBloodBleManager shareManager] setBluetoothName:@"AILink"];

(3)开始测量

[[ELBloodBleManager shareManager] sendInteractiveInstructions:(ELBloodInteractionTypeStartTest)];

(4)停止测量

[[ELBloodBleManager shareManager] sendInteractiveInstructions:(ELBloodInteractionTypeStopTest)];

(5)切换单位

[[ELBloodBleManager shareManager] changeUnit:(ELDeviceBloodPressureUnit_mmhg)];

(6)开关语音

[[ELBloodBleManager shareManager] sendSwitchVoice:(ELBloodBleSwitchVoiceTypeOff)];

5.接收数据

-(void)bluetoothManagerReceiceResponseType:(ELInetSetCmdType)type result:(ELSetBluetoothResponseType)result{
    if (type == ELInetSetCmdTypeSetName) {
        if (result == ELSetBluetoothResponseTypeSuccess) {
            [self addLog:@"Set name Success "];
        }else if (result == ELSetBluetoothResponseTypeFailure){
            [self addLog:@"Set name failure "];
        }else if (result == ELSetBluetoothResponseTypeNoSupport){
            [self addLog:@"Set name unsupport "];
        }

    }

}

//MARK:获取设备支持的单位
-(void)bluetoothManagerBackDeviceSupportUnitWithWeight:(NSArray<NSNumber *> *)weightArray Height:(NSArray<NSNumber *> *)heightArray Temperature:(NSArray<NSNumber *> *)temperatureArray BloodPressure:(NSArray<NSNumber *> *)bloodPressureArray Pressure:(NSArray<NSNumber *> *)pressureArray{
    //这里体重和身高单位
    //设置单位时，要设置设备支持的单位
    
}

-(void)bluetoothManagerReceiveBMVersion:(NSString *)bmVersion{
    [self addLog:bmVersion];
}
-(void)bloodBleManagerReceiceTestData:(ELBloodBleDataModel *)model type:(ELBloodBleDataModelType)type{
    [self addLog:[NSString stringWithFormat:@"dia = %@--sys=%@ unit = %ld point = %ld",model.dia,model.sys,AiLinkBloodUnitDic[@(model.unit)],model.point]];
}
-(void)bloodBleManagerReceiveSetSwitchVoiceOperationType:(ELBloodBleSwitchVoiceType)type result:(ELSetBluetoothResponseType)result{
    if (type == ELBloodBleSwitchVoiceTypeOff) {
        [self addLog:[NSString stringWithFormat:@"close voice result = %ld",result]];
    }else{
        [self addLog:[NSString stringWithFormat:@"open voice result = %ld",result]];
    }
}
-(void)bloodBleManagerReceiveSetUnitResult:(ELSetBluetoothResponseType)type{
    [self addLog:[NSString stringWithFormat:@"change unit result = %ld",type]];
}
-(void)bloodBleManagerReceiveFailCode:(ELBloodFailCode)code{
    [self addLog:[NSString stringWithFormat:@"error code = %ld",code]];
}
-(void)bloodBleManagerUpdateBleState:(ELBluetoothState)state{
    switch (state) {
        case ELBluetoothStateUnavailable:
        {
            self.title = @"Please open the bluetooth";
        }
            break;
        case ELBluetoothStateAvailable:
        {
            self.title = @"Bluetooth is open";
        }
            break;
        case ELBluetoothStateScaning:
        {
            self.title = @"Scaning";
        }
            break;
        case ELBluetoothStateConnectFail:
        {
            self.title = @"Connect fail";
        }
            break;
        case ELBluetoothStateDidDisconnect:
        {
            self.title = @"Disconnected";
        }
            break;
        case ELBluetoothStateDidValidationPass:
        {
            self.title = @"Connected";
            [[ELBloodBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeReadDeviceSupportUnit)];
        }
            break;
        case ELBluetoothStateFailedValidation:
        {
            self.title = @"Illegal equipment";
        }
            break;
            case ELBluetoothStateWillConnect:
            self.title = @"Connecting";
            break;
        default:
            break;
    }
}

6.说明

血压计需要从设备读取支持的血压单位，单位切换时要以支持的单位为准

六、集成身高仪

1.导入头文件并遵守协议

#import <AILinkBleSDK/ELHeightGaugeBleManager.h>
@interface HeightGuageConnectViewController ()<ELBluetoothManagerDelegate,ELHeightGaugeBleManagerDelegate>

2.设置代理

[ELHeightGaugeBleManager shareManager].heightGaugeDelegate = self;
    [ELHeightGaugeBleManager shareManager].delegate  =self;

3.扫描并连接设备

[[ELHeightGaugeBleManager shareManager] startScan];
-(void)heightGaugeBleManagerScanDevices:(NSArray<ELPeripheralModel *> *)devices{
    [[ELHeightGaugeBleManager shareManager] connectPeripheral:device];

}

4.发送数据

(1)获取BM版本号

[[ELHeightGaugeBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeGetBMVersion)];

(2)设置蓝牙名称

[[ELHeightGaugeBleManager shareManager] setBluetoothName:@"AILink"];

(3)切换单位

[[ELHeightGaugeBleManager shareManager] changeUnit:(ELDeviceHeightUnit_CM)];

5.接收数据

-(void)bluetoothManagerReceiceResponseType:(ELInetSetCmdType)type result:(ELSetBluetoothResponseType)result{
    if (type == ELInetSetCmdTypeSetName) {
        if (result == ELSetBluetoothResponseTypeSuccess) {
            [self addLog:@"Set name Success "];
        }else if (result == ELSetBluetoothResponseTypeFailure){
            [self addLog:@"Set name failure "];
        }else if (result == ELSetBluetoothResponseTypeNoSupport){
            [self addLog:@"Set name unsupport "];
        }

    }

}
//MARK:获取设备支持的单位
-(void)bluetoothManagerBackDeviceSupportUnitWithWeight:(NSArray<NSNumber *> *)weightArray Height:(NSArray<NSNumber *> *)heightArray Temperature:(NSArray<NSNumber *> *)temperatureArray BloodPressure:(NSArray<NSNumber *> *)bloodPressureArray Pressure:(NSArray<NSNumber *> *)pressureArray{
    //这里体重和身高单位
    //设置单位时，要设置设备支持的单位
    
}

-(void)bluetoothManagerReceiveBMVersion:(NSString *)bmVersion{
    [self addLog:bmVersion];
}
/**
 call back ELHeightGaugeBleDataModel
 */
-(void)heightGaugeBleManagerReceiceTestData:(ELHeightGaugeBleDataModel *_Nonnull)model{
    [self addLog:[NSString stringWithFormat:@"height = %ld  unit = %@ point = %ld",model.height,AiLinkBleHeightUnitDic[@(model.heightUnit)],model.heightPoint]];
}

/**
 call back the result of set unit
 */
-(void)heightGaugeBleManagerReceiveSetUnitResult:(ELSetBluetoothResponseType)type{
    [self addLog:[NSString stringWithFormat:@"change unit result = %lu",(unsigned long)type]];
}

/**
 call back fail code
 */
-(void)heightGaugeBleManagerReceiveFailCode:(ELHeightGaugeFailCode)code{
    [self addLog:[NSString stringWithFormat:@"error code = %lu",(unsigned long)code]];
}
-(void)heightGaugeBleManagerUpdateBleState:(ELBluetoothState)state{
    switch (state) {
        case ELBluetoothStateUnavailable:
        {
            self.title = @"Please open the bluetooth";
        }
            break;
        case ELBluetoothStateAvailable:
        {
            self.title = @"Bluetooth is open";
        }
            break;
        case ELBluetoothStateScaning:
        {
            self.title = @"Scaning";
        }
            break;
        case ELBluetoothStateConnectFail:
        {
            self.title = @"Connect fail";
        }
            break;
        case ELBluetoothStateDidDisconnect:
        {
            self.title = @"Disconnected";
        }
            break;
        case ELBluetoothStateDidValidationPass:
        {
            self.title = @"Connected";
            [[ELHeightGaugeBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeReadDeviceSupportUnit)];
        }
            break;
        case ELBluetoothStateFailedValidation:
        {
            self.title = @"Illegal equipment";
        }
            break;
            case ELBluetoothStateWillConnect:
            self.title = @"Connecting";
            break;
        default:
            break;
    }
}

6.说明

身高仪需要从设备读取支持的身高单位，单位切换时要以支持的单位为准

七、集成遥控器

1.导入头文件并遵守协议

#import <AILinkBleSDK/ELRemoteControlBleManager.h>
@interface RemoteControlConnectViewController ()<ELBluetoothManagerDelegate,ELRemoteControlBleDelegate>

2.设置代理

[ELRemoteControlBleManager shareManager].remoteControlDelegate = self;
    [ELRemoteControlBleManager shareManager].delegate  =self;

3.扫描并连接设备

[[ELRemoteControlBleManager shareManager] startScan];
-(void)remoteControlManagerScanDevices:(NSArray<ELRemoteControlDeviceModel *> *)deviceList{
    [[ELRemoteControlBleManager shareManager] connectPeripheral:device];

}

4.发送数据

(1)获取BM版本号

[[ELRemoteControlBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeGetBMVersion)];

(2)设置蓝牙名称

[[ELRemoteControlBleManager shareManager] setBluetoothName:@"AILink"];

(3)发送指令

[[ELRemoteControlBleManager shareManager] sendRemoreControlData:(RemoteControlType_8_4)];

5.接收数据

-(void)bluetoothManagerReceiceResponseType:(ELInetSetCmdType)type result:(ELSetBluetoothResponseType)result{
    if (type == ELInetSetCmdTypeSetName) {
        if (result == ELSetBluetoothResponseTypeSuccess) {
            [self addLog:@"Set name Success "];
        }else if (result == ELSetBluetoothResponseTypeFailure){
            [self addLog:@"Set name failure "];
        }else if (result == ELSetBluetoothResponseTypeNoSupport){
            [self addLog:@"Set name unsupport "];
        }

    }

}
-(void)bluetoothManagerReceiveBMVersion:(NSString *)bmVersion{
    [self addLog:bmVersion];
}
-(void)remoteControlManagerUpdateState:(ELBluetoothState)state{
    switch (state) {
        case ELBluetoothStateUnavailable:
        {
            self.title = @"Please open the bluetooth";
        }
            break;
        case ELBluetoothStateAvailable:
        {
            self.title = @"Bluetooth is open";
        }
            break;
        case ELBluetoothStateScaning:
        {
            self.title = @"Scaning";
        }
            break;
        case ELBluetoothStateConnectFail:
        {
            self.title = @"Connect fail";
        }
            break;
        case ELBluetoothStateDidDisconnect:
        {
            self.title = @"Disconnected";
        }
            break;
        case ELBluetoothStateDidValidationPass:
        {
            self.title = @"Connected";
        }
            break;
        case ELBluetoothStateFailedValidation:
        {
            self.title = @"Illegal equipment";
        }
            break;
            case ELBluetoothStateWillConnect:
            self.title = @"Connecting";
            break;
        default:
            break;
    }
}

6.说明

遥控器没有单位，发送指令也不需要回调数据处理

八、集成额温枪

1.导入头文件并遵守协议

#import <AILinkBleSDK/ELForeHeadBleManager.h>
@interface ForeheadConnectViewController ()<ELBluetoothManagerDelegate,ELForeheadBleManagerDelegate>

2.设置代理

[ELForeHeadBleManager shareManager].foreheadDelegate = self;
    [ELForeHeadBleManager shareManager].delegate  =self;

3.扫描并连接设备

[[ELForeHeadBleManager shareManager] startScan];
-(void)foreheadBleManagerScanDevices:(NSArray<ELPeripheralModel *> *)devices{
    [[ELForeHeadBleManager shareManager] connectPeripheral:device];

}

4.发送数据

(1)获取BM的版本号

[[ELForeHeadBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeGetBMVersion)];

(2)设置蓝牙名称

[[ELForeHeadBleManager shareManager] setBluetoothName:@"AILink"];

(3)切换单位

[[ELForeHeadBleManager shareManager] changeUnit:(ELDeviceTemperatureUnit_C)];

5.接收数据

-(void)bluetoothManagerReceiceResponseType:(ELInetSetCmdType)type result:(ELSetBluetoothResponseType)result{
    if (type == ELInetSetCmdTypeSetName) {
        if (result == ELSetBluetoothResponseTypeSuccess) {
            [self addLog:@"Set name Success "];
        }else if (result == ELSetBluetoothResponseTypeFailure){
            [self addLog:@"Set name failure "];
        }else if (result == ELSetBluetoothResponseTypeNoSupport){
            [self addLog:@"Set name unsupport "];
        }

    }

}
//MARK:获取设备支持的单位
-(void)bluetoothManagerBackDeviceSupportUnitWithWeight:(NSArray<NSNumber *> *)weightArray Height:(NSArray<NSNumber *> *)heightArray Temperature:(NSArray<NSNumber *> *)temperatureArray BloodPressure:(NSArray<NSNumber *> *)bloodPressureArray Pressure:(NSArray<NSNumber *> *)pressureArray{
    //这里体重和身高单位
    //设置单位时，要设置设备支持的单位
    
}

-(void)bluetoothManagerReceiveBMVersion:(NSString *)bmVersion{
    [self addLog:bmVersion];
}
/**
 Callback temperature(回调温度)

 @param model ELForeheadBleDataModel
 */
-(void)foreheadBleManagerReceiveTemperature:(ELForeheadBleDataModel *_Nonnull)model dataType:(ForeheadBleDataType)dataType{
    [self addLog:[NSString stringWithFormat:@"temperature = %@ unit = %@  point = %ld",model.temperature,AiLinkBleTempUnitDic[@(model.unit)],model.point]];
}

/**
Set unit callback( 设置单位回调)

 @param type 结果
 */
-(void)foreheadBleManagerReceiveSetUnitResult:(ELSetBluetoothResponseType)type{
    [self addLog:[NSString stringWithFormat:@"Change Unit result = %lu",(unsigned long)type]];
}

/**
 Error code sent on the device(设备上发错误码)

 @param code 错误码
 */
-(void)foreheadBleManagerReceiveFailCode:(ForeheadFailCode)code{
    [self addLog:[NSString stringWithFormat:@"error code = %lu",(unsigned long)code]];
}

-(void)foreheadBleManagerUpdateBleState:(ELBluetoothState)state{
    switch (state) {
        case ELBluetoothStateUnavailable:
        {
            self.title = @"Please open the bluetooth";
        }
            break;
        case ELBluetoothStateAvailable:
        {
            self.title = @"Bluetooth is open";
        }
            break;
        case ELBluetoothStateScaning:
        {
            self.title = @"Scaning";
        }
            break;
        case ELBluetoothStateConnectFail:
        {
            self.title = @"Connect fail";
        }
            break;
        case ELBluetoothStateDidDisconnect:
        {
            self.title = @"Disconnected";
        }
            break;
        case ELBluetoothStateDidValidationPass:
        {
            self.title = @"Connected";
            [[ELForeHeadBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeReadDeviceSupportUnit)];
        }
            break;
        case ELBluetoothStateFailedValidation:
        {
            self.title = @"Illegal equipment";
        }
            break;
            case ELBluetoothStateWillConnect:
            self.title = @"Connecting";
            break;
        default:
            break;
    }
}

6.说明

额温枪需要从设备读取支持的温度单位，单位切换时要以支持的单位为准

九、集成温度计

1.导入头文件并遵守协议

#import <AILinkBleSDK/ELThermometerBleManager.h>
@interface ThermometerConnectViewController ()<ELBluetoothManagerDelegate,ELThermometerBleDelegate>

2.设置代理

[ELThermometerBleManager shareManager].thermometerDelegate = self;
    [ELThermometerBleManager shareManager].delegate  =self;

3.扫描并连接设备

[[ELThermometerBleManager shareManager] startScan];
-(void)thermometerManagerScanDevices:(NSArray<ELThermometerDeviceModel *> *)thermometerDevices{
    [[ELThermometerBleManager shareManager] connectPeripheral:device];

}

4.发送数据

(1)获取BM版本号

[[ELThermometerBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeGetBMVersion)];

(2)设置蓝牙名称

[[ELThermometerBleManager shareManager] setBluetoothName:@"AILink"];

(3)切换单位

[[ELThermometerBleManager shareManager] changeThermometerUnit:(ELDeviceTemperatureUnit_F)];

5.接收数据

-(void)bluetoothManagerReceiceResponseType:(ELInetSetCmdType)type result:(ELSetBluetoothResponseType)result{
    if (type == ELInetSetCmdTypeSetName) {
        if (result == ELSetBluetoothResponseTypeSuccess) {
            [self addLog:@"Set name Success "];
        }else if (result == ELSetBluetoothResponseTypeFailure){
            [self addLog:@"Set name failure "];
        }else if (result == ELSetBluetoothResponseTypeNoSupport){
            [self addLog:@"Set name unsupport "];
        }

    }

}

//MARK:获取设备支持的单位
-(void)bluetoothManagerBackDeviceSupportUnitWithWeight:(NSArray<NSNumber *> *)weightArray Height:(NSArray<NSNumber *> *)heightArray Temperature:(NSArray<NSNumber *> *)temperatureArray BloodPressure:(NSArray<NSNumber *> *)bloodPressureArray Pressure:(NSArray<NSNumber *> *)pressureArray{
    //这里体重和身高单位
    //设置单位时，要设置设备支持的单位
    
}

-(void)bluetoothManagerReceiveBMVersion:(NSString *)bmVersion{
    [self addLog:bmVersion];
}
/**
 Callback temperature(回调温度)

 @param model ELForeheadBleDataModel
 */
-(void)thermometerManagerReceiveModel:(ELThermometerBleModel *)model{
    [self addLog:[NSString stringWithFormat:@"temperature = %ld unit = %@  point = %ld",model.temperature,AiLinkBleTempUnitDic[@(model.unit)],model.tempPoint]];
}
/**
Set unit callback( 设置单位回调)

 @param type 结果
 */
-(void)thermometerManagerSetUnitResults:(ThermometerBleResultType)result{
    [self addLog:[NSString stringWithFormat:@"Change Unit result = %lu",(unsigned long)result]];
}

/**
 Error code sent on the device(设备上发错误码)

 @param code 错误码
 */
-(void)thermometerManagerBackDeviceErrorCode:(ThermometerBleErrorCode)code{
    [self addLog:[NSString stringWithFormat:@"error code = %lu",(unsigned long)code]];
}

-(void)thermometerManagerUpdateState:(ELBluetoothState)state{
    switch (state) {
        case ELBluetoothStateUnavailable:
        {
            self.title = @"Please open the bluetooth";
        }
            break;
        case ELBluetoothStateAvailable:
        {
            self.title = @"Bluetooth is open";
        }
            break;
        case ELBluetoothStateScaning:
        {
            self.title = @"Scaning";
        }
            break;
        case ELBluetoothStateConnectFail:
        {
            self.title = @"Connect fail";
        }
            break;
        case ELBluetoothStateDidDisconnect:
        {
            self.title = @"Disconnected";
        }
            break;
        case ELBluetoothStateDidValidationPass:
        {
            self.title = @"Connected";
            [[ELThermometerBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeReadDeviceSupportUnit)];
        }
            break;
        case ELBluetoothStateFailedValidation:
        {
            self.title = @"Illegal equipment";
        }
            break;
            case ELBluetoothStateWillConnect:
            self.title = @"Connecting";
            break;
        default:
            break;
    }
}

6.说明

温度计需要从设备读取支持的温度单位，单位切换时要以支持的单位为准

十、集成胎压监测

1.导入头文件并遵守协议

#import <AILinkBleSDK/ELWheelMonitorBleManager.h>
@interface WheelMonitorConnectViewController ()<ELBluetoothManagerDelegate,WheelMonitorBleManagerDelegate>

2.设置代理

[ELWheelMonitorBleManager shareManager].wheelMonitordelegate = self;
    [ELWheelMonitorBleManager shareManager].delegate  =self;

3.扫描并连接设备

[[ELWheelMonitorBleManager shareManager] startScan];
-(void)wheelMonitorBleManagerScanDevices:(NSArray<ELPeripheralModel *> *)devices{
    [[ELWheelMonitorBleManager shareManager] connectPeripheral:device];

}

4.发送数据

(1)获取BM版本号

[[ELWheelMonitorBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeGetBMVersion)];

(2)设置蓝牙名称

[[ELWheelMonitorBleManager shareManager] setBluetoothName:@"AILink"];

(3)切换单位

[[ELWheelMonitorBleManager shareManager] changePressureUnit:(ELDevicePressureUnit_kPa) tempUnit:(ELDeviceTemperatureUnit_C)];

(4)获取胎压记录

[[ELWheelMonitorBleManager shareManager] getWheelData:(WheelMonitorGetWheelData_LeftBack)];
        [[ELWheelMonitorBleManager shareManager] getWheelData:(WheelMonitorGetWheelData_LeftFront)];
        [[ELWheelMonitorBleManager shareManager] getWheelData:(WheelMonitorGetWheelData_RightBack)];
        [[ELWheelMonitorBleManager shareManager] getWheelData:(WheelMonitorGetWheelData_RightFront)];

(5)设置胎压阈值

[[ELWheelMonitorBleManager shareManager] sendSettingWheelPressureLimitWithFrontMax:300 frontMin:200 backMax:300 backMin:200 pressureUnit:(ELDevicePressureUnit_kPa) valuePoint:0];

(6)设置胎温阈值

[[ELWheelMonitorBleManager shareManager] sendSettingWheelTempLimitWithTempMax:100 tempMin:50 tempUnit:(ELDeviceTemperatureUnit_C) valuePoint:0 openVoice:YES];

(7)切换语音报警

[[ELWheelMonitorBleManager shareManager] sendSettingWheelOpenVoice:YES];

5.接收数据

-(void)bluetoothManagerReceiceResponseType:(ELInetSetCmdType)type result:(ELSetBluetoothResponseType)result{
    if (type == ELInetSetCmdTypeSetName) {
        if (result == ELSetBluetoothResponseTypeSuccess) {
            [self addLog:@"Set name Success "];
        }else if (result == ELSetBluetoothResponseTypeFailure){
            [self addLog:@"Set name failure "];
        }else if (result == ELSetBluetoothResponseTypeNoSupport){
            [self addLog:@"Set name unsupport "];
        }

    }

}

//MARK:获取设备支持的单位
-(void)bluetoothManagerBackDeviceSupportUnitWithWeight:(NSArray<NSNumber *> *)weightArray Height:(NSArray<NSNumber *> *)heightArray Temperature:(NSArray<NSNumber *> *)temperatureArray BloodPressure:(NSArray<NSNumber *> *)bloodPressureArray Pressure:(NSArray<NSNumber *> *)pressureArray{
    //这里体重和身高单位
    //设置单位时，要设置设备支持的单位
    
}

-(void)bluetoothManagerReceiveBMVersion:(NSString *)bmVersion{
    [self addLog:bmVersion];
}
/**
 Set unit callback(设置单位回调)
 
 @param type 结果
 @param settingType 支持类型:
 WheelMonitorBleDataTypeSetUnitResult
 WheelMonitorBleDataTypeSetPressureLimit
 WheelMonitorBleDataTypeSetTempLimit
 WheelMonitorBleDataTypeSetVoice
 */
-(void)wheelMonitorBleManagerReceiveSetResult:(ELSetBluetoothResponseType)type settingType:(WheelMonitorBleDataType)settingType{
    [self addLog:[NSString stringWithFormat:@"set type = %lu set result = %lu",settingType,type]];
}

/**
 Callback tire pressure data(回调胎压数据)

 @param model 胎压数据模型
 */
-(void)wheelMonitorBleManagerWheelMonitorData:(ELWheelMonitorBleModel *_Nonnull)model{
    [self addLog:[NSString stringWithFormat:@"wheel number = %ld voltage = %@ pressure = %@%@ temperature=%@%@",model.wheelType,model.v,model.p,AiLinkBlePressureUnitDic[@(model.pressureUnit)],model.t,AiLinkBlePressureUnitDic[@(model.tempUnit)]]];
}


/**
 Get front and rear wheel parameter setting type(获取前后轮参数设置类型)

 @param type 类型
 */
-(void)wheelMonitorBleManagerReceiveSettingType:(WheelMonitorSettingType)type{
    [self addLog:[NSString stringWithFormat:@"setting type = %lu",type]];
}
-(void)wheelMonitorBleManagerUpdateBleState:(ELBluetoothState)state{
    switch (state) {
        case ELBluetoothStateUnavailable:
        {
            self.title = @"Please open the bluetooth";
        }
            break;
        case ELBluetoothStateAvailable:
        {
            self.title = @"Bluetooth is open";
        }
            break;
        case ELBluetoothStateScaning:
        {
            self.title = @"Scaning";
        }
            break;
        case ELBluetoothStateConnectFail:
        {
            self.title = @"Connect fail";
        }
            break;
        case ELBluetoothStateDidDisconnect:
        {
            self.title = @"Disconnected";
        }
            break;
        case ELBluetoothStateDidValidationPass:
        {
            self.title = @"Connected";
              //前后轮胎压的阀值是一起设备还是分开设置
            [[ELWheelMonitorBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:ELInetGetCmdTypeGetBasicInfoData];

            //获取设备支持的单位
            [[ELWheelMonitorBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeReadDeviceSupportUnit)];
        }
            break;
        case ELBluetoothStateFailedValidation:
        {
            self.title = @"Illegal equipment";
        }
            break;
            case ELBluetoothStateWillConnect:
            self.title = @"Connecting";
            break;
        default:
            break;
    }
}

6.说明

胎压监测需要从设备读取支持的压力单位和温度单位，单位切换时要以支持的单位为准

连接成功后，调用如下方法获取前后轮胎压的阀值是一起设备还是分开设置

            [[ELWheelMonitorBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:ELInetGetCmdTypeGetBasicInfoData];

十一、集成体脂秤

1.导入头文件并遵守协议

#import <AILinkBleSDK/ELBodyFatScaleBleManager.h>
@interface BodyFatScaleConnectViewController ()<ELBluetoothManagerDelegate,ELBodyFatScaleBleDelegate,ElBleWifiDelegate>

2.设置代理

[ELBodyFatScaleBleManager shareManager].bodyFatScaleDelegate = self;
    [ELBodyFatScaleBleManager shareManager].delegate  =self;
//如果是wifi+ble的秤，需要设置wif代理
    [ELBodyFatScaleBleManager shareManager].bleWifiDelegate = self;

3.扫描并连接设备

[[ELBodyFatScaleBleManager shareManager] startScan];
-(void)bodyFatScaleManagerScanDevices:(NSArray<ELBodyFatScaleDeviceModel *> *)scaleDevices{
    [[ELBodyFatScaleBleManager shareManager] connectPeripheral:device];

}

4.发送数据

(1)获取BM版本号 (2)设置蓝牙名称 (3)切换单位

5.接收数据、处理数据、交互

-(void)bluetoothManagerReceiceResponseType:(ELInetSetCmdType)type result:(ELSetBluetoothResponseType)result{
    if (type == ELInetSetCmdTypeSetName) {
        if (result == ELSetBluetoothResponseTypeSuccess) {
            [self addLog:@"Set name Success "];
        }else if (result == ELSetBluetoothResponseTypeFailure){
            [self addLog:@"Set name failure "];
        }else if (result == ELSetBluetoothResponseTypeNoSupport){
            [self addLog:@"Set name unsupport "];
        }

    }

}

//MARK:获取设备支持的单位
-(void)bluetoothManagerBackDeviceSupportUnitWithWeight:(NSArray<NSNumber *> *)weightArray Height:(NSArray<NSNumber *> *)heightArray Temperature:(NSArray<NSNumber *> *)temperatureArray BloodPressure:(NSArray<NSNumber *> *)bloodPressureArray Pressure:(NSArray<NSNumber *> *)pressureArray{
    //这里体重和身高单位
    //设置单位时，要设置设备支持的单位
    //这里只要体重数据
    self.units = weightArray;

}

-(void)bluetoothManagerReceiveBMVersion:(NSString *)bmVersion{
    [self addLog:bmVersion];
}
-(void)bluetoothManagerReceiveMCUConnectedState:(struct ELMCUStateStruct)stateStrct{
    
    BleWiFiConnectState wifiState = stateStrct.wifiState;
    

    if (self.p.deviceType == ELSupportDeviceTypeBLE_WIFIScale) {
        //蓝牙WiFi体脂秤
        //请求会话码
        [[ELBodyFatScaleBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:ELInetGetCmdTypeBleWifiGetSNNumber];
        //MARK:1.WiFi配置提示用户配网
        //TODO:注意：wifi配置过程必须保持蓝牙与设备的连接
        if (wifiState == BleWiFiConnectStateNoWiFi) {
            //1.如果没有配网，则提示用户去配网
            //MARK:2.WiFi配置先获取wifi列表
            //
            [[ELBodyFatScaleBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:ELInetGetCmdTypeBleWifiGetNearbyWifi];
            //
//            UIAlertController *alert = [UIAlertController alertControllerWithTitle:@"Change Unit" message:@"" preferredStyle:(UIAlertControllerStyleAlert)];
//            UIAlertAction *action = [UIAlertAction actionWithTitle:@"去配网" style:(UIAlertActionStyleDefault) handler:^(UIAlertAction * _Nonnull action) {
//                if ([ELBodyFatScaleBleManager shareManager].state == ELBluetoothStateDidValidationPass) {
//                    WiFiSetupViewController *vc = [[WiFiSetupViewController alloc] init];
//                    [self.navigationController pushViewController:vc animated:YES];
//                }else{
//                    [self addLog:@"Disconnected"];
//                }
//
//            }];
//            UIAlertAction *action2 = [UIAlertAction actionWithTitle:@"取消" style:(UIAlertActionStyleDefault) handler:^(UIAlertAction * _Nonnull action) {
//
//            }];
//            [alert addAction:action];
//            [alert addAction:action2];
//            [self presentViewController:alert animated:YES completion:nil];
        }
    }
    ///MARK:9.wifi配置结果
    //wifi相关的其他指令和数据接收，请查看ELBluetoothManager.h文件
    if (stateStrct.wifiState == BleWiFiConnectStateSuccess) {
        //成功
        //MARK:10.获取wifi设备的SN号，即设备id
        [[ELBodyFatScaleBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeBleWifiGetSNNumber)];
    }else{
        //失败
    }

}

/**
 Callback to set unit result(回调设置单位结果)
 
 @param result 结果
 */
- (void)bodyFatScaleManagerCallBackSetUnitResult:(ELSetBluetoothResponseType)result{
    switch (result) {
        case ELSetBluetoothResponseTypeSuccess:
        {
            [self addLog:@"Change Unit Success"];
        }
            break;
        case ELSetBluetoothResponseTypeFailure:
        {
            [self addLog:@"Change Unit Failure"];
        }
            break;
        case ELSetBluetoothResponseTypeNoSupport:
        {
            [self addLog:@"Unsupport Change Unit"];
        }
            break;
        default:
            break;
    }
}
//MARK:回调Wifi列表
-(void)bleWifiReceiveWifiDetailModel:(ELBleWifiDetailModel *)model{
//    MARK:3.WiFi配置得到Wifi列表
    //用一个tableview显示喽
    [self addLog:[NSString stringWithFormat:@"wifi类型---%lu 名称---%@",(unsigned long)model.wifiState,model.wifiName]];
    
}
-(void)bleWifiReceiveScanedWifiCount:(int)count {
    //MARK:扫描Wifi结束
    //MARK:4.WiFi配置得到一个附近wifi的列表，点击选择一个wifi，进行配置
    //MARK:5.输入wifi密码
    //写个“textfield”输入密码
    //MARK:6.先发送配置wifi的mac地址的指令
//    [[ELBodyFatScaleBleManager shareManager] bleWifiSetConnectWifiMac:[NSData data]];
}
-(void)bleWifiReceiceResponseType:(ELInetSetCmdType)type result:(ELSetBluetoothResponseType)result{
    
    [self addLog:[NSString stringWithFormat:@"bleWifiReceiceResponseType==%lu----%lu",type,result]];
    if (result == ELSetBluetoothResponseTypeSuccess) {
        //设置WiFi结果
        if (type == ELInetSetCmdTypeBleWifiSetWifiMac) {
            //MARK:7.再发送配置wifi的密码的指令
            [[ELBodyFatScaleBleManager shareManager] bleWifiSetWifiPwd:@"WiFi密码"];
        }else if (type == ELInetSetCmdTypeBleWifiSetWifiPwd){
            //MARK:8.然后发起连接Wifi
            [[ELBodyFatScaleBleManager shareManager] bleWifiSetupWifiConnect:YES];
        }else if (type == ELInetSetCmdTypeBleWifiSetConnectWifi){
            //获取连接状态
        }
    }
    else{
        //TODO:Wifi配置过程中失败的情况自行处理
    }
    
}
/**
 MCU requests user information( MCU 请求用户信息)
 
 @param status 请求状态
 */
- (void)bodyFatScaleManagerMCURequestAppUserInfoType:(BodyFatScaleMCURequestUserInfoStatus)status{
    if (status == BodyFatScaleMCURequestUserInfoStatus_Get) {
        //下发当前用户给秤
        [[ELBodyFatScaleBleManager shareManager] sendCurrentUserToBle:[self getOneUser]];
    }else if (status == BodyFatScaleMCURequestUserInfoStatus_Success){
        [self addLog:@"MCU requests user information success"];
    }else if (BodyFatScaleMCURequestUserInfoStatus_Fail){
        [self addLog:@"MCU requests user information failure"];
    }

}


/**
 Return weight and body fat model(返回重量及体脂model)
 */
-(void)bodyFatScaleManagerCallBackWeight:(ELBodyFatScaleBleWeightModel *)weightModel state:(BodyFatScaleMeasureStatus)status{
    switch (status) {
        case BodyFatScaleMeasureStatus_Unstable:
        {
            [self addLog:[NSString stringWithFormat:@"Unstable data weight = %ld unit = %@ point = %ld adc = %ld",weightModel.weight,AiLinkBleWeightUnitDic[@(weightModel.weightUnit)],weightModel.weightPoint,weightModel.adc]];
        }
            break;
        case BodyFatScaleMeasureStatus_Stable:
        {
            [self addLog:[NSString stringWithFormat:@"Stable data weight = %ld unit = %@ point = %ld adc = %ld",weightModel.weight,AiLinkBleWeightUnitDic[@(weightModel.weightUnit)],weightModel.weightPoint,weightModel.adc]];
        }
            break;
        case BodyFatScaleMeasureStatus_Failed:
        {
            [self addLog:@"Test failure"];
        }
            break;
        case BodyFatScaleMeasureStatus_Complete:
        {
            [self addLog:[NSString stringWithFormat:@"Tested weight = %ld unit = %@ point = %ld adc = %ld",weightModel.weight,AiLinkBleWeightUnitDic[@(weightModel.weightUnit)],weightModel.weightPoint,weightModel.adc]];
            
            //更新用户信息给秤
            [[ELBodyFatScaleBleManager shareManager] sendCurrentUserToBle:[self getOneUser]];
            //下发用户列表
            [[ELBodyFatScaleBleManager shareManager] sendOfflineUserListToBle:[self get8Users]];
        }
            break;
        default:
            break;
    }
}


/**
 Return temperature (unit: ° C)(返回温度（单位：°C）)
 
 @param temp 温度（单位：°C）
 */
-(void)bodyFatScaleManagerCallBackTemp:(NSString *)temp{
    [self addLog:[NSString stringWithFormat:@"temperature is %@",temp]];
}

/**
 Back to impedance measurement(返回阻抗测量)
 
 @param status 阻抗测量状态
 @param adc 阻抗
 */
-(void)bodyFatScaleManagerCallBackAdcMeasureStatus:(BodyFatScaleAdcMeasureStatus)status adcValue:(NSInteger)adc{
    switch (status) {
        case BodyFatScaleAdcMeasureStatus_Testing:
        {
            [self addLog:@"adc testing"];
        }
            break;
        case BodyFatScaleAdcMeasureStatus_Success:
        {
            [self addLog:[NSString stringWithFormat:@"adc is %ld",adc]];
        }
            break;
        case BodyFatScaleAdcMeasureStatus_Fail:
        {
            [self addLog:@"adc test failure"];
        }
            break;
        case BodyFatScaleAdcMeasureStatus_SuccessCustom:
        {
            [self addLog:[NSString stringWithFormat:@"adc is %ld and user app algum",adc]];
        }
            break;
        default:
            break;
    }
}

/**
 Callback heart rate measurement(回调心率测量)
 
 @param status 心率测量状态
 @param heartRate 心率
 */
-(void)bodyFatScaleManagerCallBackHeartRateMeasureStatus:(BodyFatScaleHeartRateMeasureStatus)status heartRateValue:(NSInteger)heartRate{
    switch (status) {
        case BodyFatScaleHeartRateMeasureStatus_Testing:
        {
            [self addLog:@"Heart Rate Testing"];
        }
            break;
        case BodyFatScaleHeartRateMeasureStatus_Success:
        {
            [self addLog:[NSString stringWithFormat:@"Heart Rate is %ld",heartRate]];
        }
            break;
        case BodyFatScaleHeartRateMeasureStatus_Fail:
        {
            [self addLog:@"Heart Rate Test failure"];
        }
            break;
        default:
            break;
    }
}

/**
 Return error code(返回错误码)
 
 @param code 错误码
 1:超重
 */
-(void)bodyFatScaleManagerCallBackErrorCode:(NSInteger)code{
    [self addLog:[NSString stringWithFormat:@"error code = %ld",code]];
}
//MARK:回调A6指令数据

/**
 Send success or failure callback for offline user list(发送离线用户列表的成功或失败回调)
 
 @param status 状态
 */
-(void)bodyFatScaleManagerCallBackUpdateRecordStatus:(BodyFatScaleUpdateRecordStatus)status{
    switch (status) {
        case BodyFatScaleUpdateRecordStatus_AllSuccess:
        {
            [self addLog:@"Update All Users Success"];
        }
            break;
        case BodyFatScaleUpdateRecordStatus_OneSuccess:
        {
            [self addLog:@"Update A User Success"];
        }
            break;
        case BodyFatScaleUpdateRecordStatus_OneFail:
        {
            [self addLog:@"Update A User Failure"];
        }
            break;
        case BodyFatScaleUpdateRecordStatus_AllFail:
        {
            [self addLog:@"Update All Users Failure"];
        }
            break;
        default:
            break;
    }
}

/**
 Request callback for offline history(请求离线历史记录的回调)
 
 @param status 状态
 */
-(void)bodyFatScaleManagerCallBackSendHistoryDataStatus:(BodyFatScaleSendHistoryDataStatus)status{
    if (status == BodyFatScaleSendHistoryDataStatus_No) {
        [self addLog:@"No offline datas"];
    }else if (status == BodyFatScaleSendHistoryDataStatus_Begin){
        [self addLog:@"Begin receive offline datas"];
    }else if (status == BodyFatScaleSendHistoryDataStatus_End){
        [self addLog:@"End receive offline datas"];
    }
    
}

/**
 APP algorithm-offline history data(APP 算法-离线历史记录数据)
 
 @param user 用户信息
 */
-(void)bodyFatScaleManagerCallBackBleUserHistoryDataCustomADCModel:(ELBodyFatScaleBleUserModel *)user bodyDataModel:(ELBodyFatScaleBleWeightModel *)bodyModel{
    //这里的身体指标等数据由app自定义算法计算得到，请区分bodyModel.algNum来调用算法
    [self addLog:[NSString stringWithFormat:@"App algorithm-offline history data:userId = %ld weight = %ld unit =%@ point = %ld",user.usrID,bodyModel.weight,AiLinkBleWeightUnitDic[@(bodyModel.weightUnit)],bodyModel.weightPoint]];
}

/**
 MCU algorithm-offline history data(MCU 算法-离线历史记录数据)
 
 @param user 用户信息
 @param bodyModel 体脂数据
 */
-(void)bodyFatScaleManagerCallBackBleUserHistoryDataModel:(ELBodyFatScaleBleUserModel *)user bodyDataModel:(ELBodyFatScaleBleWeightModel *)bodyModel{
    //这里的身体指标数据由秤计算得到
    [self addLog:[NSString stringWithFormat:@"MCU algorithm-offline history data:userId = %ld weight = %ld unit =%@ point = %ld",user.usrID,bodyModel.weight,AiLinkBleWeightUnitDic[@(bodyModel.weightUnit)],bodyModel.weightPoint]];
}

-(void)bleWifiReceiveWifiSNCode:(int)code{
    //MARK:11.根据wifi设备的设备id从服务器获取离线数据（找自己后台要接口）
}

-(void)bodyFatScaleManagerUpdateState:(ELBluetoothState)state{
    switch (state) {
        case ELBluetoothStateUnavailable:
        {
            self.title = @"Please open the bluetooth";
        }
            break;
        case ELBluetoothStateAvailable:
        {
            self.title = @"Bluetooth is open";
        }
            break;
        case ELBluetoothStateScaning:
        {
            self.title = @"Scaning";
        }
            break;
        case ELBluetoothStateConnectFail:
        {
            self.title = @"Connect fail";
        }
            break;
        case ELBluetoothStateDidDisconnect:
        {
            self.title = @"Disconnected";
        }
            break;
        case ELBluetoothStateDidValidationPass:
        {
            self.title = @"Connected";
            //获取设备支持的单位
            [[ELBodyFatScaleBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeReadDeviceSupportUnit)];
            //将你自己设置的单位发给秤
            ELDeviceWeightUnit unit = ELDeviceWeightUnit_KG;
            [[ELBodyFatScaleBleManager shareManager] changeBodyFatScaleUnit:unit];
            //请求历史记录
            [[ELBodyFatScaleBleManager shareManager] sendCmd_RequestHistory];
            
            //下发用户列表
            [[ELBodyFatScaleBleManager shareManager] sendOfflineUserListToBle:[self get8Users]];
            
            if (self.p.deviceType == ELSupportDeviceTypeBLE_WIFIScale) {
                //获取蓝牙连接状态
                [[ELBodyFatScaleBleManager shareManager] getBluetoothInfoWithELInetGetCmdType:(ELInetGetCmdTypeGetConnectState)];
            }
        }
            break;
        case ELBluetoothStateFailedValidation:
        {
            self.title = @"Illegal equipment";
        }
            break;
        case ELBluetoothStateWillConnect:
            self.title = @"Connecting";
            break;
        default:
            break;
    }
}
-(NSArray<ELBodyFatScaleBleUserModel *> *)get8Users{
    NSMutableArray *users = [[NSMutableArray alloc] init];
    for (int i=0; i<8; i++) {
        ELBodyFatScaleBleUserModel *user = [[ELBodyFatScaleBleUserModel alloc] init];
        user.createTime = [[NSDate date] timeIntervalSince1970];
        user.usrID = i;
        user.role = i%4;
        user.sex = i%2;
        user.age = 26+i;
        user.height = 170+i;
        user.weight = 600+i;
        user.adc = 560+i;
        [users addObject:user];
    }

    return users.copy;
}

-(ELBodyFatScaleBleUserModel *)getOneUser{
    ELBodyFatScaleBleUserModel *user = [[ELBodyFatScaleBleUserModel alloc] init];
    user.createTime = [[NSDate date] timeIntervalSince1970];
    user.usrID = 0;
    user.role = BodyFatScaleRole_Ordinary;
    user.sex = ELBluetoothUserSex_Woman;
    user.age = 26;
    user.height = 170;
    user.weight = 600;
    user.adc = 560;
    return user;
}

十三、广播体脂秤

1.文件说明

ELBroadcastScaleBleHeader一些用到的枚举;

ELBroadcastScaleBleManager续承自ELBluetoothManager的类，用于扫描附近设备和接收数据;

ELBroadcastScaleDataModel广播秤的数据结构模型.

2.使用范例Demo

打开AILinkBleSDKDemo_iOS，运行到手机上，选择集成广播秤，参照BroadcastScaleViewController.m的使用.

十四、八电极体脂秤

1.文件说明

ELEightScaleSDKHeader一些用到的枚举和数据结构;

ELEightScaleBleManager续承自ELBluetoothManager的类，用于扫描附近设备、连接设备、接收数据和发送数据给设备;

ELEightScaleBleDataModel称量结果的数据结构模型.

2.使用范例Demo

打开AILinkBleSDKDemo_iOS，运行到手机上，选择八电极体脂秤，参照EightScaleScanViewController.m和EightScaleConnectionViewController.m的使用.

十五、蓝牙WiFi牙刷

1.文件说明

ELToothburshHeader一些用到的枚举和数据结构;

ELToothbrushBleManager续承自ELBluetoothManager的类，用于扫描附近设备、连接设备、接收数据和发送数据给设备.

2.使用范例Demo

打开AILinkBleSDKDemo_iOS，运行到手机上，选择蓝牙WiFi牙刷，参照ToothbrushScanViewController.m和ToothbrushConnectionViewController.m的使用.

6.说明

体脂秤需要从设备读取支持的体重单位，单位切换时要以支持的单位为准

详情及wifi配置逻辑请见协议和demo

联系我们

感谢您使用品网SDK进行产品研发，如在使用过程中有任何疑问，欢迎随时与我们联系。帮助企业实现产品的快速智能化，是我们不断前行的动力。 Web: www.inet-tek.com Email : iot.support@inet-tek.com

READMD_CN.md 74KB Originalformat Blame Verlauf

AILinkBleSDK使用说明

更新说明

使用条件

使用前准备

开始使用

一、公共部分

1.公共属性

2.公共方法

3.公共协议

5.说明

二、自己定义协议走透传

1.导入父类或子类的头文件

2.连接设备

3.发送透传数据

4.接收透传数据

5.说明

三、有AILink协议自己解析数据

1.继承

2.设置单例

3.实现父类的方法

4.定义自己的协议

5.实现自定义方法

6.调用

7.说明

四、集成婴儿秤

1.导入头文件并遵守协议

2.设置代理

3.扫描并连接设备

4.发送数据

5.接收数据

6.说明

五、集成血压计

1.导入头文件并遵守协议

2.设置代理

3.扫描并连接设备

4.发送数据

5.接收数据

6.说明

六、集成身高仪

1.导入头文件并遵守协议

2.设置代理

3.扫描并连接设备

4.发送数据

5.接收数据

6.说明

七、集成遥控器

1.导入头文件并遵守协议

2.设置代理

3.扫描并连接设备

4.发送数据

5.接收数据

6.说明

八、集成额温枪

1.导入头文件并遵守协议

2.设置代理

3.扫描并连接设备

4.发送数据

5.接收数据

6.说明

九、集成温度计

1.导入头文件并遵守协议

2.设置代理

3.扫描并连接设备

4.发送数据

5.接收数据

6.说明

十、集成胎压监测

1.导入头文件并遵守协议

2.设置代理

3.扫描并连接设备

4.发送数据

5.接收数据

6.说明

十一、集成体脂秤

1.导入头文件并遵守协议

2.设置代理

3.扫描并连接设备

4.发送数据

5.接收数据、处理数据、交互

READMD_CN.md 74KB

Originalformat Blame Verlauf